User's Manual

Getting Connected

TO CONNECT TO A MIXER

UNBALANCED 1/4”

1. Connect unbalanced 1/4” cable (included) to the unbalanced output from the Hybrid-Quad receiver.

2. Connect the other end of the 1/4” cable to a microphone input channel on a mixer/ampliﬁer.

BALANCED XLR (OPTIONAL)

1. Connect 4 balanced XLR cables (not included) to the balanced outputs of the Hybrid-Quad receiver.

2. Connect each end of the XLR cables into individual microphone input jacks on a mixer/ampliﬁer to be used

(ex. Mic 1, Mic 2, Mic 3, Mic 4).

Note: Example illustrated is for clarity only. For ease of operation, attach the channel 1 output to the channel 1 input, channel 2

output to the channel 2 input, channel 3 output to the channel 3 input, and the channel 4 output to the channel 4 input on a mixer.

Mixer

HYBRID-QUAD

13.5V POWER IN MIX OUT

CH 4 CH 3 CH 2 CH 1

Rear Panel

HYBRID-QUAD

13.5V POWER IN MIX OUT

CH 4 CH 3 CH 2 CH 1

Mixer

Rear Panel HYBRID-QUAD