Owner`s manual

Remote Control Functions
Insertion of Remote Control Batteries
N
otes concerning use of dry batteries:
• Be sure batteries are inserted so that the positive (+) and negative (-) polarities are correct.
• Batteries installed with incorrect polarities may leak and damage this unit.
• Never subject the batteries to excessive heat or flame; do not attemt to disassemble them; and be sure they are
not short-circuited.
• If the unit is not to be used for a long time, remove the batteries and store them in a cool dark place.
• Always remove old, weak or worn-out batteries promptly and dispose of them.
• Never mix old and new batteries, nor natteries of different types. (Carbon or Alkaline)
R
emote Control Operation Notes
9
REMOTE CONTROL
1
Open the battery
housing cover.
2
Insert the batteries in
the numbered order
3
Close the cover untill it
snaps back together
1
Use the Remote Control
within 7 meters.
2
Face it toward the Remote
Control signal sensor.
3
Make sure transmitter
and receptor part of the
unit are free from dust.
Obstacles should
be avoided.
Remote Control
Transmitter
DTX-5000G
Receptor
Excessive
dust might
prevent
reception.
Remote
Control
DTX-5000G
Remote
Control
DTX-5000G