Owner`s manual

(b)
If the TV does not have a VIDEO INPUT jack you may connect that end of the cable to the VIDEO INPUT of a
VCR and connect the RF OUTPUT of the VCR to the TV ANTENNA INPUT jack.
(
c)
If there is no VCR present, you will need to use an RF Modulator. To obtain an RF Modulator, check with
your VocoPro dealer. An RF Modulator can also be purchased from Radio Shack™.
Connecting the Audio to the Sound System
The DTX-5000G has two pairs of AUDIO OUTPUTS:
AUDIO OUT 1
:
This OUTPUT is for connecting the DTX-5000G directly to the INPUT of a power amplifier.
Using the supplied RCA cable, make connections from the AUDIO OUT 1 to the AUDIO INPUTS
of the power amplifier.
A
UDIO OUT 2:
This OUTPUT is for connecting the DTX-5000G to a Receiver/Pre-Amp or mixer.
Using the supplied RCA cable, make connections from the AUDIO OUT 2
to the “AUX” or “CD” INPUT of the Receiver/Pre-Amp or Mixer.
13
GETTING CONNECTED
Video In
Video Out
RF Out
Tv antenna
Input
COAX
CABLE
RF MODULATOR
Song lyrics
appear on TV
Audio Out #1
Audio In
Audio
Out #2
Audio In
L
R
L
R