owner's manual stereo amplifier KC-300Pro
Table Of Contents
- pg 01 Cover.pdf
- pg 02 Safety.pdf
- pg 03 Caution.pdf
- pg 04 Welcome.pdf
- pg 05 Listening.pdf
- pg 06 Table of Contents.pdf
- pg 07 Features.pdf
- pg 08 Getting Started.pdf
- pg 09 front Panel.pdf
- pg 10 Rear Panel.pdf
- pg 11 Control Discriptions.pdf
- pg 12 Rack Mounting.pdf
- pg 13 Getting Connected.pdf
- pg 14 Getting Connected.pdf
- pg 15 Advance.pdf
- pg 16 Troubleshooting.pdf
- pg 17 Glossary terms.pdf
- pg 18 Glossary terms.pdf
- pg 19 Gear.pdf
- pg 20 Gear.pdf
- pg 21 Gear.pdf
- pg 22 Gear.pdf
Getting Connected
Connecting Player(s) to the KC-300Pro
The KC-300Pro can have 2 A/V devices and 1 line-level auxiliary device connected as it’s source
players.
(a) For each A/V device, you will need an A/V patch cable (red, white and yellow RCA plugs). Plug
one set of plugs to the appropriate AUDIO OUT and VIDEO OUT jacks on you’re A/V device. Plug
the other set of plugs to the A/V1 INPUT and A/V1 VIDEO INPUT jacks on the KC-300Pro. Repeat
steps for a second A/V device using A/V2 INPUT and A/V2 VIDEO INPUT jacks.
(b) To connect an AUXILIARY device, you will need either a line-level patch cable (red and white
RCA plugs), or XLR cables. Plug one pair of RCA/XLR plugs to the appropriate AUDIO OUT jacks
on your auxiliary device. Plug the other pair of RCA/XLR plugs to the AUX IN jacks on the
KC-300Pro.
Connecting the DKC-300 Pro to Mixer/Amplifier/Recording Device(s)
The KC-300Pro has one AUDIO OUTPUT channel with RCA and XLR jacks:
(a) Using either a line-level patch cable or XLR patch cable, connect one pair of plugs to the
appropriate AUDIO IN jacks on your amplifier/receiver. Connect the other pair of plugs to the AUDIO
OUT jacks on the KC-300Pro. Repeat for a second mixer/amplifier/recording device.
Note: For most A/V patch cables red and
white plugs are for audio, yellow plug is video
13
IN
A/V DEVICE
KC-300Pro