Operating instructions

10
STAND ALONE USE
TRANSMITTER
1. Connect the source audio to the transmitter module via the 1/8” audio input jack.
2. Connect the Power USB cable to the transmitter module.
3. Select your desired signal strength output: Low, Medium, or High.
RECEIVER
1. Connect the 1/8” audio output jack to your speaker system.
2. Connect the Power USB cable to the receiver module.
3. Select your desired audio output: Left-mono, Right-mono, or Stereo.
Note: It is possible to utilize both methods of use, for example:
- Transmitter can be installed and the receiver used as a standalone module. OR
- Receiver can be installed and the transmitter used as a standalone module.
Note: Please refer to Commonly Asked Questions if no connection is established when both modules are powered on.
Operation
AUDIO
IN
MULTI-PURPOSE
JACK
+5V
L M H
Source
Audio
Transmitter Rear Panel
AUDIO
IN
MULTI-PURPOSE
JACK
+5V
L M H
Transmitter Rear Panel
AUDIO
IN
MULTI-PURPOSE
JACK
+5V
L M H
Transmitter Rear Panel
1 2
3
1
AUDIO
OUT
MULTI-PURPOSE
JACK
+5V
L S R
Receiver Rear Panel
2
Transmitter Rear Panel
AUDIO
OUT
MULTI-PURPOSE
JACK
+5V
L S R
3
AUDIO
IN
MULTI-PURPOSE
JACK
+5V
L M H
Receiver Rear Panel
Speaker System