User's Manual

19
Descriptions and Features
Main Unit (Rear):
TWIN-BANK
controller boxB BoxA/BoxB
CENTER FRONT R STEREO R
STEREO L
VIDEO
Y
Cb/Pb
Cr/Pr
COAXIAL
S-VIDEO OPTICAL
VIDEO
FRONT R
FRONT L
SURROUND R
SUBWOOFER
EXTIR USB
MIXED
AUDIO OUT
DIGITAL
AUDIO OUT
5.1 CH SURROUND AUDIO OUT
VIDEO OUT
FRONT LSURROUND L
TWIN-BANK
controller boxA
CENTER FRONT R STEREO R
STEREO L
VIDEO
Y
Cb/Pb
Cr/Pr
COAXIAL
S-VIDEO OPTICAL
SURROUND R
SUBWOOFER
USB
MIXED
AUDIO OUT
DIGITAL
AUDIO OUT
5.1 CH SURROUND AUDIO OUT
VIDEO OUT
FRONT LSURROUND L
COMMUNICATION PORT
11
2 3 4
5
6
7
8
9
10
1
1. USB PORT — Use this port for direct access to the hard drive using a computer. Note that the V-BANK
must be powered on to access the hard drives using a computer.
2. 5.1 CHANNEL RCA JACKS — These jacks are for connecting to 5.1 channel ready amplifiers/receivers.
3. L/R STEREO RCA JACKS — These jacks output left/right stereo audio.
4. Y/PB/PR (COMPONENT) VIDEO JACKS — These jacks output VIDEO to a TV or monitor via COMPONENT
VIDEO cables. COMPONENT VIDEO outputs the different color signals (Pr/Pb) and luminance signal (Y)
separately in order to achieve high fi delity in reproducing colors. The description of the component video
output connectors may differ depending on the TV set or monitor (e.g. Pr/Pb Y, Cr/Cb/Y, R-Y/B-Y/Y,
etc.). Please refer to the operating instructions of the TV set or monitor for details.
5. S-VIDEO JACK — This jack outputs VIDEO to a display device (TV, monitor, etc.) via an S-VIDEO cable.
S-VIDEO provides better color separation and better resolution by separating the color and picture signals
of a composite video signal.
6. DIGITAL OPTICAL AUDIO JACK — This digital out is for connecting devices with an OPTICAL cable. Please
make sure to remove the protective cover from this jack prior to connecting an OPTICAL cable. When not
using this input, keep the protective cover on to protect it from dust and foreign material.
7. RCA (COMPOSITE) VIDEO JACK — This jack outputs VIDEO to TVs or monitors.
8. DIGITAL COAXIAL AUDIO JACK — This digital output is for connecting devices with a COAXIAL audio cable.
9. SWITCHED RCA VIDEO JACK — This jack outputs video from either drive A or B. Use the Drive A and
Drive B buttons on the front panel to select the output.
10. SWITCHED RCA L/R STEREO AUDIO JACKS — These jacks output stereo audio from either side A or
side B. Use the Drive A and Drive B buttons on the front panel to select the output.
11. COMMUNICATION PORT – This port is used to connect to the remote unit.