User's Manual

Operations

Using Menu Mode

In Menu Mode, files are arranged in a folder tree structure similar to

a computer. To use Menu Mode, press the MENU/PRO MODE button

on the remote unit. In Menu Mode, you will see a paned window with

‘SMART NAVI’ displayed at the top.

The window is displayed with the folder tree on the left pane and folder

contents on the right pane. When you highlight and select a folder on the

left pane, its folder contents are displayed in the right pane.

Use the navigation buttons to ‘navigation’ menu selections and use the ‘enter’ button make a selection.

Repeat can be used in Menu Mode

Pressing the repeat button will cycle through the repeat modes: REP-ONE, FOLDER REPEAT, SINGLE, and

FOLDER repeat modes.

REP-ONE will repeat the currently playing track

FOLDER REPEAT will repeat all the tracks in the current folder

SINGLE will play the current track then stop

FOLDER will play all the tracks in the current folder then stop

Tracks can be selected by their track number

On the far right of each track name, you will see a default number. Enter that number either with the

remote control or remote unit to begin playback

Removing Vocals from a Multiplexed Track

On specially recorded audio tracks you can remove the demo vocals so you can sing to the instrumental

track. The thing to remember is the track must be recorded with music on one channel and vocals on the

other (called multiplex).

To remove vocals:

Press the VOCAL button on the remote control or the LANGUAGE L/R button on the remote unit until the

vocals are removed. Remember, the track must be multiplexed.

Using Digital Key Control

Use the digital key controller to change the key of the music. This is handy when the natural key of a track is

out of the singer’s vocal range. There are a total of 7 steps up or down.

To use key control:

Press the button to raise the natural key one step.

Press the button to lower the natural key one step.

Press the button to return to the original musical key.

NOTE: Karaoke Mode must be enabled in the Setup Menu in order to use digital key control.

SMART NAVI

ROOT TRACK NAME 1

FOLDER NAME TRACK NAME 2

FOLDER NAME TRACK NAME 3