User's Manual

25
Operations
Using Pitch Control
Pitch control is used to adjust the playback speed of a track. You can increase/decrease the playback
speed a maximum of 12 %. Pitch control on the TWIN-BANK is key locked, meaning that adjusting the pitch
does not affect the natural key of the track.
To use pitch control:
Slide the pitch control slider up to increase the pitch or down to decrease the pitch.
Adjusting the pitch control set point:
You can change the 0% pitch control position to match the slider location.
To set the 0% pitch control point:
Set the pitch control slider to where you want the 0% pitch control point to be.
In the Setup Menu, go to GENERAL>PITCH CONTROL
Select SET ZERO.
Setup Menu
Use the Setup Menu to make all the necessary system setting changes. To enter the Setup Menu, press
the SETUP button on the remote control or remote unit.
GENERAL SETUP PAGE
PIC MODE:
AUTO: Sets the screen resolution automatically. (Recommended)
FILM: Sets the resolution for film.
VIDEO: Sets the resolution for karaoke video.
SMART: Sets the resolution for progressive video.
SUPERSMART: Sets the resolution for hi-res progressive video.
ANGLE MARK:
ON: The angle mark will appear on screen when multiple angles are available for viewing (VOB Only).
OFF: The angle mark will not appear.
OSD LANG: Selects the language for the OSD menu. (English language only)
CAPTIONS:
ON: Subtitles will appear onscreen when DVD subtitles are available and selected.
OFF: Subtitles will not be displayed.
SCREEN SAVER:
ON: The screen saver will appear after a period of screen/function inactivity.
OFF: The screen saver is off, and will not appear.
SINGLE MODE:
ON: While in Pro Mode, playback will stop after a song has finished playing.
OFF: While in Pro Mode, the next song will begin playing after the previous song has finished.
PITCH CONTROL
SET ZERO: Sets the current slider pitch slider position to 0% pitch control.