User's Manual

26
Operations
SPEAKER SETUP PAGE
(KARAOKE MODE MUST BE SET TO OFF TO ACCESS CENTER, REAR, SUBWOOFER, CENTER DELAY, REAR
DELAY, AND TEST TONE SETTINGS.)
DOWNMIX:
LT/RT: Select when connecting to a Dolby Digital amplifier.
STEREO: Select when connecting to a 2-channel stereo amplifier/mixer.
OFF: Select when using the 5.1 channel outputs on the rear panel.
CENTER:
ON: Select if you have a center speaker connected.
OFF: Select if you do have a center speaker connected. (If set to off, center channel audio will be routed
to the front speakers.)
REAR:
ON: Select if you have a center speaker connected.
OFF: Select if you do not have rear speakers connected.
SUBWOOFER:
ON: Select if you have a subwoofer connected.
OFF: Select if you do not have a subwoofer connected.
CENTER DELAY:
Select from 0ms to 5ms the amount of time delay for the center speaker.
REAR DELAY:
Select from 0ms to 15ms the amount of time delay for the rear speakers.
TEST TONE:
ON: When set to on, the unit will generate a test tone to all 5.1 channels for speaker connectivity
troubleshooting.
OFF: Disables the test tone.
AUDIO SETUP PAGE
SPDIF OUTPUT: Used with digital audio output (coaxial and optical)
SPDIF OFF: Select to disable SPDIF output.
SPDIF/RAW: Select when connecting to a 5.1 channel digital amplifier (DTS/Dolby Movie).
SPDIF/PCM: Select when connecting to a 2-channel digital amplifier (Audio CD).
OP MODE:
LINE OUT: Normal audio output level.
RF REMOD: Boosts the audio output level.
DUAL MONO:
STEREO: Normal Stereo mode.
L MONO: Outputs the left channel to the left and right outputs.
R MONO: Outputs the right channel to the left and right outputs.
MIX MONO: Outputs both the left and right channel to the left and right outputs.
COMPRESSION: Select level of dynamic range compression to be used (Off for no compression; Full for
maximum compression).
PRO LOGIC: Creates a simulated surround sound environment with Pro Logic-encoded audio. KARAOKE
MODE NEEDS TO BE SET TO OFF TO ENABLE PRO LOGIC
OFF: Disables Pro Logic audio mode.
ON: Enables Pro Logic mode.
AUTO: Select to have the unit auto-detect and enable Pro-Logic when disc media is Pro-Logic encoded.
LPCM OUT: 48K - 96K Select the sampling rate that matches your disc media and amplifier.