User's Manual

28
Troubleshooting
No picture
• Make sure everything is connected firmly and properly.
• Make sure there are no defective cables.
• Make sure all of your components are turned on.
• Make sure all of the components (amp, mixer, TV, etc.) are set to the proper inputs.
• Make sure the TV or monitor is working correctly.
• Make sure the correct drive is selected for output (DRIVE A/B).
Remote control does not work
• Make sure the batteries are inserted, inserted correctly, and not out of power.
• Point the remote control directly at the remote sensor on the machine or IR sensor (if using)
• Move closer to the machine.
• Ensure the remote is set to control the drive you are attempting to control.
There is no power
• Make sure the power cord is firmly connected to the power outlet.
• If using a power strip/surge-protector, make sure that it is plugged in and switched on.
There is no sound
• Make sure everything is connected firmly and properly.
• Make sure there are no defective cables.
• Make sure all of your components are turned on.
• Make sure all of the components (amp, mixer, TV, etc.) are set to the proper inputs.
The picture is unclear
• Make sure that the TV TYPE (N/P button on the remote) is set correctly:
NTSC: In North America, Japan and many other Asian countries
PAL: In Europe
• Try restarting the TWIN-BANK.
USB thumb drive is not recognized
• Make sure the USB thumb drive is formatted to FAT or FAT32 file system. Other file systems such as
NTFS are not supported.