Owner's manual
(REAR PANEL)
PARTS AND FUNCTIONS
9
16
15
20
6
7 8
5
10 114
13
14
12
1921
1
2
5
3RD MICROPHONE INPUT VOLUME CONTROL: This
controls the volume for the 3rd microphone input. Turn
clockwise to increase volume, counter-clockwise to decrease.
7
TREBLE CONTROL FOR MIC-1 AND MIC-2: This
controls the amount TREBLE tone microphones 1 and 2 will
receive. Turn clockwise to increase TREBLE tone and
counter-clockwise to decrease the treble tone. (See “USING
EFFECTS AND CHANGING THE KEY”, Adding Bass or
Treble To The Vocals)
6
BASS CONTROL FOR MIC-1 AND MIC-2: This
controls the amount BASS tone microphones 1 and 2 will
receive. Turn clockwise to increase bass tone and counter-
clockwise to decrease the bass tone. (See “USING EFFECTS
AND CHANGING THE KEY”, Adding Bass or Treble To The
Vocals)
8
ECHO CONTROL FOR MIC-1 AND MIC-2: This
controls the amount ECHO microphones 1 and 2 will
receive. Turn clockwise to increase echo and counter-clock-
wise to decrease echo. (See “USING EFFECTS AND
CHANGING THE KEY”, Adding Effects (Delay/Echo)
To The VocalS ignal)
9
SAFETY SCREW: Once the Twister II amplifier is properly
inserted into the Twister II road case, this screw, when fully
inserted provides a “stop” for the amplifer and should not be
removed. (See “BEFORE YOU START, IMPORTANT!” and
“ASSEMBLY, Assembling the Twister II”).
11
VOLTAGE SELECTOR SWITCH: This switch is used to
select the voltage setting according to country. For use in the
U.S. the voltage selector should be set to 110v-120v and
220v-240v in Europe.
10
NTSC/PAL SELECTOR SWITCH: This switch is used to
select the NTSC/PAL setting according to country. For U.S.
televisions systems it should be set to NTSC and for
European television systems the selector should be set to
PAL.
12
200W AC OUTLET: This outlet can be used to connect
another component providing it does not exceed 200 watts
maximum power consumption.
FUSE: IMPORTANT! If the fuse blows out it’s a good
indication that there may be a short in the system.
DO NOT REPLACE THE FUSE! Doing so could possibly
cause additional damage to the unit. Take your
Twister II to an authorized repair facillity.
13
17
18
17
3