User Manual

14
Getting Connected
MOUNTING
The UDH-Ultra receivers are already connected together. If, for whatever reason, they need to be
reconnected, please follow the steps below.
1. Attach the two UDH receivers together be aligning the tab and slot located on each side.
2. Slide the two receivers together to form one UDH-Ultra receiver.
3. Attach the two smaller brackets to either end of the UDH-Ultra receiver.
USING THE HEADSET, LAVALIERE, AND INSTRUMENT CABLE
The UDH-Ultra bodypacks can accept audio from either the headset microphone, lavaliere microphone, or an
instrument. They would all connect to the same Mini-XLR input jack located at the top of the UDH bodypacks.
Note: The instrument cable is intended for equipment with a line-level mono signal, such as a guitar or bass.
UDH
PROFESSIONAL
UHF/DIGITAL HYBRID
WIRELESS BODYPACK
Note: The bodypack can only
accomodate one connection
at a time.