User Guide

13
Getting Connected
TO CONNECT TO A MIXER
BALANCED XLR
1. Connect 2 balanced XLR cables (not included) to the balanced outputs of the UDH receiver.
2. Connect each end of the XLR cables into individual microphone input jacks on a mixer to be used
(ex. Mic1, Mic 2).
Note: Example illustrated is for clarity only. For ease of operation, attach the channel 1 output to the channel 1 input on a mixer
and the channel 2 output to the channel 2 input on a mixer.
UNBALANCED 1/4”
1. Connect 1 unbalanced 1/4” cable (included) to the Unbalanced output from the UDH receiver.
2. Connect the other end of the 1/4” cable to a microphone input channel on a mixer.
ANT.B BALANCEDUNBALANCED
+12dBu
+18dBu
BALANCED
+18dBu
ANT.A
12-14 V DC
500mA
Mixer
Rear Panel UDH-DUAL
ANT.B BALANCEDUNBALANCED
+12dBu
+18dBu
BALANCED
+18dBu
ANT.A
12-14 V DC
500mA
Mixer
Rear Panel UDH-DUAL