User's Manual

Basic Operations

Using the UHF-18 DIAMOND

The UHF-18 DIAMOND can be used as a plug-in module or as a stand-alone module. In both setups, the function of the

UHF-18 DIAMOND is the same.

To use the UHF-18 DIAMOND:

1. Plug in all power sources.

2. Switch on the your main unit and the UHF-18 DIAMOND.

3. Switch on the wireless microphone.

4. Adjust the volume using the UHF-18 DIAMONDs volume control, and using the mic input volume control on your main

unit.

When using the UHF-18 DIAMOND as a plug-in module, (SOUNDMAN, DVD-SOUNDMAN, HERO-RV, CHAMPION-RV) the

UHF-18 DIAMOND will use one of the input channels. Be sure to determine which input is being used, as plugging a wired

mic or instrument into that input channel will switch off the wireless microphone.

To determine which input channel the UHF-18 DIAMOND is using (SOUNDMAN, DVD-SOUNDMAN, HERO-RV, CHAMPION-

RV):

1. Turn all the individual input channel volume controls down.

2. Speak into the wireless microphone while turning up each input channel independently.

3. Make a note of which input channel the UHF-18 DIAMOND is using so that no cables are plugged into that input

channel while the UHF-18 DIAMOND is in use.