Digital-Quad 4 Channel UHF Wireless Handheld Microphone System o w n e r ’ s m a n u a l
Table of Contents Safety Instructions . . . . . . FCC Information . . . . . . . . Welcome. . . . . . . . . . . . . Listening for a Lifetime . . . Getting Started . . . . . . . . Descriptions and Functions Getting Connected . . . . . . Attaching the Rack Mounts Commonly Asked Questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety Instructions 8. Ventilation - The appliance should be situated so its location does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation slots. CAUTION RISK OF SHOCK CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Only refer servicing to qualified service personnel. 9.
FCC Information 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!: This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Vocopro may void your authority, granted by the FCC, to use this product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable(s) supplied with this product MUST be used. Follow all installation instructions.
Welcome And thank you for purchasing the Digital-Quad from VocoPro, your ultimate choice in Karaoke entertainment! With years of experience in the music entertainment business, VocoPro is a leading manufacturer of Karaoke equipment, and has been providing patrons of bars, churches, schools, clubs and individual consumers the opportunity to sound like a star with full-scale club models, in-home systems and mobile units.
Listening for a Lifetime 6HOHFWLQJ ILQH DXGLR HTXLSPHQW VXFK DV WKH XQLW \RX·YH MXVW SXUFKDVHG LV RQO\ WKH VWDUW RI \RXU PXVLFDO HQMR\PHQW 1RZ LW·V WLPH WR FRQVLGHU KRZ \RX FDQ PD[LPL]H WKH IXQ DQG H[FLWHPHQW \RXU HTXLSPHQW RIIHUV 9RFR3UR DQG WKH (OHFWURQLF ,QGXVWULHV $VVRFLDWLRQ·V &RQVXPHU (OHFWURQLFV *URXS ZDQW \RX WR JHW WKH PRVW RXW RI \RXU HTXLSPHQW E\ SOD\LQJ LW DW D VDIH OHYHO 2QH WKDW OHWV WKH VRXQG FRPH WKURXJK ORXG DQG FOHDU ZLWKRXW DQQR\LQJ EODULQJ RU GLV
Getting Started IF YOU PURCHASED THE DIGITAL QUAD-H - Digital-Quad Receiver (4) Wireless Handheld Microphones (DIGITAL-QUAD-H ONLY) (2) Antennas Power Adapter 1/4-to-1/4 Mic Cable (2) Rack Ears (1 Long & 1 Short) Mounting Plate (7) Phillips Head Screws 7
Getting Started WHAT’S IN THE BOX: DIGITAL QUAD-B - Digital-Quad Receiver (4) Wireless Bodypacks (DIGITAL-QUAD-B ONLY) (4) Headset Microphones (DIGITAL-QUAD-B ONLY) (4) Lapel Microphones (DIGITAL-QUAD-B ONLY) (2) Antennas Power Adapter 1/4-to-1/4 Mic Cable (2) Rack Ears (1 Long & 1 Short) Mounting Plate (7) Phillips Head Screws 8
Descriptions and Functions RECEIVER - FRONT PANEL 1. ON/OFF Button - Powers the receiver on/off. 2. Mic Volume - Adjusts the volume of their respective microphone channels. 3. RF LEDs - Registers Mic status: LED will shine when associated mic is powered on. 4. AF LEDs - Registers Mic transmission: LED will flash when audio is received. 5. BNC Connectors - Used to mount antennas. RECEIVER - BACK PANEL 1. Unbalanced Mic Out - Outputs all mic signals via the included 1/4” cable to a mixer or amplifier. 2.
Descriptions and Functions HANDHELD MICROPHONE - DIGITAL-QUAD-H ONLY 1. Mic Head - Picks up vocals. Note: Please hold within 5-6 inches of your mouth for best sound. 2. Mic ON/OFF Switch - Powers microphone ON/OFF. 3. Mic Battery LED - Indicates battery status. Note: When powered on, the LED will flash once and go out. When battery life is low, LED will flash continuously. 4. Battery Compartment - Insert two (2x) AA batteries to provide power.
Descriptions and Functions BODYPACK HEADSET MICROPHONES - DIGITAL-QUAD-B ONLY 1. Antenna - Transmits audio to receiver. 2. ON/OFF - Powers bodypack ON/OFF. 3. Power LED - Indicates battery level. a.) Solid Green LED - Battery level is healthy and good to use. b.) Blinking Red LED - Batteries are low and require changing soon. 4. Mini-XLR Jack - Connect headset and lavalier microphone cables here. 5. Gain - Used to alter the overall volume output of the bodypack.
Getting Connected TO CONNECT TO A MIXER UNBALANCED 1/4” 1. Connect unbalanced 1/4” cable (included) to the unbalanced output from the Digital-Quad receiver. 2. Connect the other end of the 1/4” cable to a microphone input channel on a mixer/amplifier. BALANCED XLR (OPTIONAL) 1. Connect 4 balanced XLR cables (not included) to the balanced outputs of the Digital-Quad receiver. 2. Connect each end of the XLR cables into individual microphone input jacks on a mixer/amplifier to be used (ex.
Attaching the Rack Mounts ATTACHING THE RACK MOUNTS The Digital-Quad is packaged with the rack mounts to attach them inside a standard 19” case. The mounts allow for a single Digital-Quad receiver to be installed, or allow up to two to be racked together. INSTALLING ONE RECEIVER 1. Identify the small and large rack mounts included with the system 2. Screw the mounts into to the side of the receiver. • Small and large can be installed on either side. 3.
Attaching the Rack Mounts INSTALLING TWO RECEIVERS 1. Identify the two small mounts and one metal plate included with both systems 2. Fix the metal plate onto the bottom of both receivers, as shown. • Make sure three screws are used to mount the plate to the bottom of each receiver. 3. Screw the two small mounts on either side of the two receivers. 4. Slide the entire assembly into a 19” case and secure with screws.
Commonly Asked Questions Q. What do I do if my mics are cutting in and out? A. Make sure both antennas are firmly attached to their posts. A. Keep the receiver away from fluorescent lights. A. Make sure microphones are being used within the operational range. A. Ensure batteries are not depleted. Q. There’s a thumping noise coming through the speakers, what is it? A. This typically occurs when the batteries are low. A. Less likely, it may be the power supply not providing the correct power.
FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any (2)interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
