Operation Manual

Contacts 25
Calling a contact
Several ways are possible:
- Select a contact. Press the key to start the call.
- Select a contact, press
OK , their number is displayed, press
[
Options ]/ Call to start the call.
- Direct call from the idle screen (only for the contacts stored
in the SIM card memory): type the number with which the
contact was saved (example : 21 ) or the
number , the number is displayed, confirm.
Speed Dialing
You can assign a short number to a contact (from 2 to 9).
- From the idle screen, make a long press on the short number
selected.
- The Speed Dialing function is displayed.
- Enter the phone number of your contact or press the
[
Contacts ] key to select a contact already saved.
- Press [ OK ] to confirm.
Displaying a contact
Select a contact from the list and press OK . The name, the
phone number and the order number with which the contact is
stored are displayed.
Note: By directly pressing three characters, the phone will
display the first contact saved in the phonebook, starting with it.
To display the different options, select a contact from the list
and press [
Options ].
Top 3 contacts
For the most incoming and outgoing calls there are three
contact names shown in the first three positions in the
phonebook.
All the options available for a contact also apply to these three
contacts. Be careful if you delete a Top 3 contact, then it is
deleted from your phonebook.
Note: if you remove the battery, the Top 3 Contacts are not
displayed when the phone is switched on again.
254031579_Vodafone 527_en.book Page 25 Jeudi, 17. avril 2008 9:32 09