203Z User Guide
1 Introduction Introduction.........................................................................3 Getting Started Parts & Functions.............................................................. 6 Display..................................................................................7 USIM Card............................................................................ 8 SD Card................................................................................
2 Glossary........................................................................... 148 Warranty & Service........................................................ 149 Customer Service............................................................ 149 Safety Precautions Safety Precautions......................................................... 152 General Notes................................................................. 158 RF Exposure Information/Specific Absorption Rate (SAR) Information.............
3 Introduction Introduction Use Wi-Fi router in any of these operating environments. Use outside these environments may affect performance. Read "Safety Precautions" and this guide thoroughly Operating environment (hardware, connected peripherals, beforehand for proper usage. installed applications, etc.) may also affect performance. Accessible services may be limited by contract conditions.
4 Package Contents The following items are included in the package. Please confirm package contents before use. Contact "Customer Service" for missing items. Keep accessories including Warranty in a safe place. Wi-Fi router has an irremovable Internal Battery.
Getting Started Parts & Functions.............................................................. 6 Display..................................................................................7 USIM Card............................................................................ 8 SD Card................................................................................ 9 Charging Battery.............................................................. 11 Charging Mobile Phone or Smartphone...........................
6 Parts & Functions Touch Keys Front/Top/Bottom Parts Part Description Display Wi-Fi router status appears SD Card Slot USIM Card Slot External Device Port Power Supply Port Install USIM Card ( Connect Micro USB Cable ( ) Power Key ( Description Press more than 3 seconds to restart Wi- ) Press to turn Display off/on Press to wake from Sleep mode Slide to power ON/OFF Wi-Fi router Touch more than 3 seconds to go back to Select upper item or increase number by one (zero appears next to nin
7 Display Status Notifications Wi-Fi router gives information on communications and Display malfunction statuses via texts. Notification Description SoftBank 4G or ULTRA SPEED area DATA SUB ULTRA SPEED sub area Signal detected, but service unavailable No Service (Immediately after moving into the service area from outside the service area, etc.
8 USIM Card USIM Card is an IC card that contains customer information including phone number. Handling USIM Card Installing USIM Card Be sure to power off to perform the following steps. Open USIM Card Slot Cover ・SoftBank Mobile Corp. is not liable for damages resulting from installing USIM Card into an IC card reader manufactured by another company. ・Keep IC chip surface clean. ・Clean USIM Card with a dry, soft cloth. ・Do not attach label on USIM Card. May cause malfunction.
9 Removing USIM Card Be sure to power off to perform the following steps. SD Card With SD Card, Wi-Fi router can be used as USB storage by a computer connected via Micro USB Cable. Wi-Fi router accepts SD Cards up to 32 GB. Compatibility is not guaranteed with all SD Cards. Open USIM Card Slot Cover Be sure to power off to perform the following steps. Open SD Card Slot Cover Getting Started Installing SD Card ・Be careful not to damage your nails.
10 Removing SD Card Be sure to power off to perform the following steps. Cautions for SD Card Usage Installing/Removing SD Card Do not use excessive force when installing/removing SD Card; may injure hands and fingers or damage SD Card. Open SD Card Slot Cover Do not install SD Card with excessive force. Do not misplace a removed SD Card. Data Backup Data saved to SD Card may be lost or altered due to accident or malfunction. Keep a copy of important data. SoftBank Mobile Corp.
11 Charging Battery Wi-Fi router is not charged fully at time of purchase. Charge When complete, remove AC Charger Battery before using. Also, Battery discharges even if Wi-Fi router is not being used. If Wi-Fi router is not used for a long time, charge before use. charging/discharging. See "Specifications" for estimated charging times and usage times. Using AC Charger Use specified AC Charger and Micro USB Cable. ・Unplug AC Charger from AC outlet.
12 Using USB (PC) Use supplied Micro USB Cable. ・Be sure to power on the PC to perform the following steps. ・USB charging may not be possible depending on PC connection environment. Charging Charging Conditions Under low temperatures charging performance decreases. Charge in temperatures between -10 °C - +45 °C. Do not charge in places where there is high humidity. USB charging may be unavailable depending on Wi-Fi router temperature.
13 Charging Mobile Phone or Smartphone Wi-Fi router can be used as a mobile battery. Use a cable that the mobile phone or smartphone specifies when charging them from Wi-Fi router. Do not use supplied Micro USB Cable for Wi-Fi router because it is for charging Wi-Fi router only. function is ON. See "Setting Power Supply Function" to change the setting. See SoftBank Mobile Website (http://www.softbank.jp/ mobile/) to check models that can be powered from Wi-Fi router.
14 Power On/Off Power On Slide to ON Restart Perform the following steps to restart Wi-Fi router if it cannot be powered on/off with . Open SD Card Slot Cover ・Be careful not to damage your nails. WLAN function activates and connects automatically to Internet. ・"Enter PIN" appears when PIN is set to USIM Card. Start WEB UI and enter PIN. See "PIN Management" for setting Press Restart Key for about 3 seconds with a fine-tipped object. PIN.
15 Precautions for Restarting Wi-Fi router Pressing Key Be careful not to hurt your fingers when pressing key. Do not press the key strongly. It may cause damage. Settings on Wi-Fi Router Operate Display on Wi-Fi router to set ON/OFF for Internet Wi-Fi, login password of SoftBank Wi-Fi spot, Maximum Data Traffic, Reset Date, ON/OFF for showing data traffic, etc. Note that operating of Display is disabled while operating WEB UI. Log out from WEB UI to operate Display on Wi-Fi router.
16 Connecting to SoftBank Wi-Fi Spot Confirm インターネットWi-Fi is selected Touch Input login password for SoftBank Wi-Fi Spot and set up connection in this window. SoftBank Wi-Fi Spot function is ON by default. When changing the setting, use WEB UI. Touch "メニュー" window appears. "インターネットWi-Fi" window appears. Confirm ON is selected Touch or to select 設定 Touch "設定" window appears. Message indicating settings appears. About 3 seconds later, "Wi-Fi" window appears.
17 Touch to select ソフトバンクWi-Fiスポット Touch Touch to go back to box on left. Getting Started ・Touch to move to next box Confirmation window appears. Repeat steps Touch to select Yes to to enter four-digit password Touch Confirm password Touch in the last box (OK) Input login password window appears. ・If skipping the setting, Touch Touch to select No and . Login password for SoftBank Wi-Fi Spot is set and message appears. About 3 seconds later, "Wi-Fi" screen appears.
18 Setting Power Supply Function Set whether or not to use Wi-Fi router as a mobile battery. By Confirm ON is selected Touch default, setting is ON. Touch "メニュー" window appears. Touch or to select 設定 Touch Message indicating setting appears. About 3 seconds later, "設定" window appears. ・If skipping the setting, Touch Touch to select OFF and . When Wi-Fi router is restarted, the setting returns to ON . ・When Power Supply function is set to ON, Icon appears.
19 Setting Data Traffic Set Maximum Data Traffic. By default, 2 GB is set. Touch or to enter number ・Touch or to toggle numbers. ・Touch or firmly until number is changed. Touch Getting Started "メニュー" window appears. Touch or to select 設定 Touch ・ is unavailable to return to previous screen. Complete the following steps first. Touch to move to next box "設定" window appears. Touch or to select データ通信量 Touch ・Touch to go back to box on left.
20 Setting Reset Date of Data Traffic Confirm number and unit Touch in the last box (OK) Set the day of the month to reset data traffic automatically. By default, setting is 31. Touch "メニュー" window appears. Touch or to select 設定 Touch Maximum Traffic is set and message appears. About 3 seconds later, "データ通信量" window appears. "設定" window appears. Touch or to select データ通信量 Touch "データ通信量" window appears. Touch or to select 自動リセット日 "自動リセット日" Setting window appears.
21 Touch or to enter number. Setting ON/OFF for Displaying Data Traffic Set whether or not to show total volume of data transfer, maximum traffic, and its bar graph. By default, setting is OFF. ・Values for data transfer volumes are approximate. Getting Started Touch "メニュー" window appears. ・Touch or to toggle numbers. ・Touch or firmly until number is changed. ・ is unavailable to return to previous screen. Complete Touch or to select 設定 Touch the following steps first.
22 Resetting Data Traffic Manually Touch or to select 表示ON/OFF Touch Reset the data traffic manually. Touch "メニュー" window appears. Touch or to select 設定 Touch "表示ON/OFF" Setting window appears. Touch to select ON Touch "設定" window appears. Touch or to select データ通信量 Touch Message indicating setting appear. About 3 seconds later, "データ通信量" Setting window appears. ・If skipping the setting, Touch Touch to select OFF and .
23 Updating Software Confirm リセット is selected Touch Enable automatic update downloading to download/install new software when available and no WLAN devices are connected. Wi-Fi router also reactivates automatically. If downloading is disabled when new software is available, appears on Display. Implement the following steps to At the time of purchase, automatic update downloading is enabled. Touch Confirmation window appears. Touch to select Yes Touch Reset starts.
24 Resetting to Factory Settings Confirm ソフトウェア更新 is selected Touch Reset all Wi-Fi router settings to their factory defaults. Touch "メニュー" window appears. Touch or to select 設定 Touch Software Update Confirmation window appears. Confirm 更新 is selected Touch "設定" window appears. Touch or to select その他 Touch ・Data communication is not available during Software Update. Confirm 実行 is selected Touch "その他" window appears.
25 Connecting with WPS Touch to select Yes Touch "Internet Wi-Fi" connection, of Wi-Fi router to Internet via Wi-Fi, and "LAN Wi-Fi" connection, of Wi-Fi router to WLAN devices via Wi-Fi can respectively be performed via WPS connection. WPS connection is performed via PIN (PIN code) or PBC (push router. See "Settings WPS Connection Method (WPS)" for WPS connections settings via "Internet Wi-Fi.
26 SoftBank Wi-Fi Spot Setting Initial Password Initial password is the four-digit password set at time of subscription. Confirming on Wi-Fi router Check WEB UI URL and telephone numbers, etc. via Wi-Fi router. However, Display operation is not available while WEB UI is logged into. Operate Display after logging out of WEB UI. Setting on WEB UI Setting login password for SoftBank Wi-Fi Spot is also possible on WEB UI. See "SoftBank Wi-Fi Spot Setting" for details.
27 Confirming Phone Numbers Confirming Messages Confirm phone numbers saved in USIM Card. Check unread messages. When there are unread messages, appears on Display. Touch Getting Started Touch "メニュー" window appears. "メニュー" window appears. Confirm 情報 is selected Touch Confirm 情報 is selected Touch "情報" window appears. "情報" window appears. Touch or to select 電話番号 Touch Touch or to select お知らせ Touch Phone numbers appear. Message appears. ・When there is no message, "お知らせはありません" appears.
28 Confirming Software Version Confirming Authentication Information Confirm software version currently installed. Wi-Fi router supports display of an electronic nameplate that certifies conformity with technical standards. Confirm authentication information as per the following steps. Touch "メニュー" window appears. Touch "メニュー" window appears. Confirm 情報 is selected Touch Confirm 情報 is selected Touch "情報" window appears. "情報" window appears.
29 Confirming SSID and Password Confirm SSID and passwords on Wi-Fi router. By default, showing of SSID and password is set to ON. "メニュー" window appears. Touch or to select SSIDとパスワード Touch Getting Started Touch SSID and password appears. ・If Multi SSID is set to ON, the SSIDs and passwords for SSID A and SSID B appear. Display of SSIDs and passwords Set ON/OFF for showing SSIDs and passwords via WEB UI. See "Advanced Settings" for details.
30
Connecting with WLAN WLAN (Wi-Fi).....................................................................32 Activating WLAN (Wi-Fi) Function..................................32 Connecting Windows PC................................................... 33 Connecting Mac.................................................................37 Connecting iPhone/iPad....................................................38 Connecting Android™ Device...........................................
32 WLAN (Wi-Fi) Activating WLAN (Wi-Fi) Function Power Wi-Fi router on to connect to Internet automatically. Overview Wi-Fi router supports IEEE 802.11b/g/n standards. Connect Connecting to 4G/LTE/3G WLAN devices (PC, game console, etc.) via WLAN for wireless data transfers. Wi-Fi router supports Wi-Fi Protected Setup (WPS), which allows WLAN connection settings to be easily configured on Slide to ON any WPS-compliant device.
33 Connecting Windows PC Operations are based on WLAN encryption method set to WPA. Select Wi-Fi router SSID Connect Windows 8 Slide to ON ・If default SSID has been changed: Select current network name. WLAN function activates and connects to Internet. Enter security key correctly Next Connecting with WLAN ・See supplied Initialization Sticker for SSID. Activate PC WLAN function ・The methods for powering ON PC WLAN functions vary for each model. Check with each manufacturer.
34 Windows 7 Select Wi-Fi router SSID Slide Connect to ON WLAN function activates and connects to Internet. ・See supplied Initialization Sticker for SSID. Activate PC WLAN function ・If default SSID has been changed: Select current network name. Start Control Panel Network and Sharing Center Network and Internet Enter security key correctly OK Connect to a network Connected WLAN device count on Wi-Fi router Display increases by one (e.g. ).
35 Windows Vista Select Wi-Fi router SSID Slide Connect to ON ・See supplied Initialization Sticker for SSID. ・If default SSID has been changed: Select current network name. Activate PC WLAN function Start Control Panel Network and Internet Enter security key correctly Connecting with WLAN WLAN function activates and connects to Internet. 接続 Network and Sharing Center ・See supplied Initialization Sticker for security key.
36 Windows XP Select Wi-Fi router SSID Slide Connect to ON WLAN function activates and connects to Internet. ・See supplied Initialization Sticker for SSID. ・If default SSID has been changed: Select current network Activate PC WLAN function Start Control Panel name.
37 Connecting Mac Screenshots/operations are based on Mac OS X 10.8, with In Network Name pulldown list, select Wi-Fi router SSID WLAN encryption method set to WPA. Mac Slide to ON WLAN function activates and connects to Internet. In Apple menu, System Preferences... Network ・If default SSID has been changed: Select current network name. Enter security key in Password correctly this network Connecting with WLAN ・See supplied Initialization Sticker for SSID.
38 Connecting iPhone/iPad In Choose a Network list, Tap Wi-Fi router SSID iPhone Screenshots/operations are based on WLAN encryption method set to WPA. Slide to ON ・See supplied Initialization Sticker for SSID. ・If default SSID has been changed: Tap current network name. WLAN function activates and connects to Internet. Enter security key in Password correctly Settings Join Wi-Fi ・See supplied Initialization Sticker for security key.
39 iPad Screenshots/operations are based on WLAN encryption method In Choose a Network list, Tap Wi-Fi router SSID set to WPA. Slide to ON ・See supplied Initialization Sticker for SSID. ・If default SSID has been changed: Tap current network name. Settings Wi-Fi Enter security key in Password correctly Connecting with WLAN WLAN function activates and connects to Internet. Join ・See supplied Initialization Sticker for security key.
40 Connecting Android™ Device Operations on based on generic Android™ devices, with Wi-Fi Wi-Fi ( ) security set to WPA/WPA2. Operations vary depending on the Android™ device. See Android™ device user guide. Descriptions are based on Android™ 2.3. Connecting Android™ Device Screenshots/operations are based on WLAN security set to WPA/WPA2. Slide to ON In Network Name list, Tap Wi-Fi router's SSID WLAN function activates and connects to Internet.
41 Enter Security Key in Password Connect Connecting Nintendo 3DS LL/3DS/ DSi LL/DSi/DS Operations are based on WLAN encryption method set to WPA, using game software compatible with Nintendo Wi-Fi Connection for Nintendo DS series. The connection steps are independently verified. Do not make inquiry to Nintendo Co., Ltd about descriptions given here. Connecting Nintendo 3DS LL/3DS Screenshots/operations are based on WLAN encryption method method is not set to WPA. See Nintendo 3DS user guide.
42 接続先の登録 Touch Wi-Fi router SSID ・See supplied Initialization Sticker for SSID. ・If default SSID has been changed: Touch current network 自分で設定する name. Enter Security Key correctly アクセスポイントを検索 決定 ・See supplied Initialization Sticker for security key.
43 Connecting Nintendo DSi LL/DSi OK Screenshots/operations are based on WLAN encryption method set to WPA. Screenshots/operations may vary when encryption method is not set to WPA. Slide to ON WLAN function activates and connects to Internet. device count on Wi-Fi router Display increases by one (e.g. ). In Nintendo DSi menu, Connecting with WLAN Connection Test starts. When "接続テストに成功しまし た!" appears, click OK to complete. Connected WLAN 本体設定 ・For operation, refer to each software user guide.
44 インターネット Touch any 未設定 接続設定 アクセスポイントを検索 上級者設定 Touch Wi-Fi router SSID ・See supplied Initialization Sticker for SSID. ・If default SSID has been changed: Touch current network name.
45 Touch the entry field OK ・See supplied Initialization Sticker for security key. Connecting with WLAN Enter security key correctly OK OK Connection test starts. When complete, "接続に成功しまし た" appears. Connected WLAN device count on Wi-Fi router Display increases by one (e.g. ).
46 Connecting Nintendo DS If the encryption method is set to WPA, Nintendo DS cannot Touch any 未設定 be connected. WPA is set by default; use WEB UI to change authentication method in Basic Settings to "OPEN," set the encryption scheme to "WEP," and set a security key in the Key field. See "Basic Settings for WLAN." Slide to ON アクセスポイントを検索 WLAN function activates and connects to Internet.
47 Network Connection Enter security key correctly 決定 Changing WLAN Security Settings Note that changing Encryption settings ends current WLAN device connections. Confirming Internet Connection Confirm Wi-Fi router is connected to Internet. Internet connection is required to establish Wi-Fi connections. See supplied Initialization Sticker for SSID (Network Name) ・Input security key that has been set on WEB UI. and security key (WPA key).
48 Connecting PSVITA/PSP ® The connection steps are independently verified. Do not Wi-Fi Settings make inquiry to Sony Computer Entertainment Inc. about descriptions given here. Connecting PlayStation ® Vita Screenshots/operations are based on WLAN encryption method set to WPA. Slide to ON Tap Wi-Fi router SSID WLAN function activates and connects to Internet. In PSVITA Home menu, Settings Start ・See supplied Initialization Sticker for SSID.
49 Connecting PSP ® (PlayStation ® Portable) OK Screenshots/operations are based on PSP-2000/PSP-3000, with WLAN encryption method set to WPA. Screenshots/operations may vary for PSP-1000* or when encryption method is not set to WPA. See PSP ® user guide. *Some steps may vary for PSP-1000 system software earlier than version 1.52. Slide to ON Connecting with WLAN When complete, Wi-Fi setting screen appears. Connected WLAN device count on Wi-Fi router Display increases by one (e.g. ).
50 New Connection Press Confirm SSID ・PSP-1000: Enter connection name Press Press . WPA-PSK (TKIP) Scan Press Press Press Select Wi-Fi router SSID Enter security key Press Press ・See supplied Initialization Sticker for security key. ・See supplied Initialization Sticker for SSID. ・If default SSID has been changed: Select current network name Press .
51 Confirm Connection Name Press . The connection test starts. When complete, test results appear. Connected WLAN device count on Wi-Fi router Display increases by one (e.g. Confirm settings ) Press SSID (Network Name) and Security Key (WPA or WEP Key) Connecting with WLAN ・PSP-1000: This screen does not appear. Skip to Step Press See supplied Initialization Sticker for SSID (Network Name) and security key (WPA key).
52 Connecting PS3 ® The connection test starts. When complete, test results Wireless Press appear. Connecting PS3 ® Screenshots/operations are based on WLAN encryption method set to WPA. Screenshots/operations may vary when encryption method is not set to WPA. See PS3 ® user guide. Slide to ON Scan Press WLAN function activates and connects to Internet.
53 WPA-PSK/WPA2-PSK SSID (Network Name) and Security Key (WPA or WEP Key) Press See supplied Initialization Sticker for SSID (Network Name) and security key (WPA key). If default SSID or security key has been changed, select current SSID or security key. SSID (network name) factory setting appears as an alphanumeric beginning with "203Za-" or "203Zb-." Unless this is changed, be careful to not connect to other appearing networks from which nearby WLAN signals are being transmitted.
54 Connecting WPS Supported WLAN Devices Confirm LAN Wi-Fi is selected Touch WPS Supported WLAN Devices Slide to ON Connection starts. Connect from WLAN devices via WPS WLAN function activates and connects to Internet. Activate the device WLAN functions and prepare for WPS settings as required When complete, "WPS接続に成功しました" appears. If other settings are required with WLAN devices, follow the onscreen instructions Connected WLAN device count on Wi-Fi router Display increases by one (e.g.
Connecting with Micro USB Cable (Windows) USB Connection with a Windows PC............................... 56 Device Recognition/Removal on Windows PC..................56 Software Installation (Windows)....................................
56 USB Connection with a Windows PC Overview Device Recognition/Removal on Windows PC Device Recognition (Windows) Wi-Fi router automatically connects to Internet when powered Upon connecting the first time, the device driver is installed on. Connect with PC via Micro USB cable to allow data automatically. communication.
57 Device Removal (Windows) ・For Windows 8/7, exit WEB UI before removing Wi-Fi router. ・For Windows Vista/Windows XP, use the Safely Remove After a message saying that Wi-Fi router can be removed safely appears, remove Wi-Fi router Hardware function to stop Wi-Fi router before removing WiFi router. Follow these steps to remove Wi-Fi router. Double-click in task tray Safely Remove Hardware window appears. ・Windows XP: Double-click in task tray. Removal is complete.
58 Software Installation (Windows) When connecting the first time, the device driver is installed automatically. Uninstalling Driver Screenshots/operations are based on Windows 8. If installation does not automatically start due to the PC environment, follow these steps: Desktop Start Explorer Manual Installation Screenshots/operations are based on Windows 8. Computer ・Power on the PC first, and then connect Wi-Fi router to the PC.
59 Cautions for Installation Removal of Wi-Fi Router Do not remove Wi-Fi router during installation. May cause installation failure, system malfunction or other system errors. Administrator Privileges Log in to an account with administrator privileges.
60
Connecting with Micro USB Cable (Mac) USB Connection with a Mac.............................................62 Device Recognition/Removal on Mac............................... 62 Setup for Mac...................................................................
62 USB Connection with a Mac Device Recognition/Removal on Mac Overview Wi-Fi router automatically connects to Internet when powered Device Recognition (Mac) on. Connect with Mac via Micro USB cable to allow data communication. Power on Mac Insert Micro USB Cable into Wi-Fi router External Device Port Insert Micro USB Cable (USB plug) Mac USB Port Mac should recognize Wi-Fi router within a few seconds. ・When Wi-Fi router installed with an SD Card is recognized, appears on the desktop.
63 Device Removal (SD Card installed) Device Removal (SD Card not installed) When removing Wi-Fi router that is installed with an SD Card When removing Wi-Fi router that is not installed with an SD from Mac, follow these steps. Files saved in SD Card may be Card from Mac, follow these steps. damaged if Wi-Fi router is improperly removed. Make sure that data transmissions are not in progress. Click Finder appears.
64 Setup for Mac Installation and uninstallation are not required because required programs are stored in Wi-Fi router. Installation and Uninstallation Setting up Network Set up Wi-Fi router in "Network Preferences..." Power on Mac When connecting Wi-Fi router to Mac with Micro USB Cable, required programs such as drivers are automatically installed. When removing Wi-Fi router, uninstallation of programs is not required. Connect Wi-Fi router to Mac "A new network interface has been detected." appears.
Settings Overview of WEB UI.........................................................66 WEB UI Window.................................................................69 Checking Device Information........................................... 72 Sharing SD Card, Managing Files.....................................77 Quick Settings.................................................................. 87 Setting 4G/LTE/3G.......................................................... 89 Setup of Data Traffic...............
66 Overview of WEB UI Use WEB UI functions in a browser to check and change Wi-Fi router's settings, by connecting Wi-Fi router to a PC or smartphone via Micro USB Cable or WLAN. Activating WEB UI Touch "メニュー" window appears. Confirm 情報 is selected Touch "情報" window appears. Confirm WEB UI URL is selected URL of WEB UI appears.
67 Enter URL in browser's address bar WEB UI Login window appears. Enter administrator password Login Settings WEB UI window appears. ・Administrator password is "admin" by default. See "Account Management (Password)" for how to change administrator passwords. ・Simultaneous login from multiple devices is impossible. ・To switch language to English, select English from the language pulldown list. To enhance security, it is recommended that the default password be changed.
68 Cautions for Operating WEB UI Logging in to WEB UI While operating Display on Wi-Fi router, WEB UI cannot be logged into. Show main window on Wi-Fi router then log into WEB UI. Changing Settings while Wi-Fi router is wirelessly connected to the device Using WEB UI to change Internet Wi-Fi Settings while Wi-Fi router is wirelessly connected to the device may close the WLAN connection. After completing settings, reconnect WLAN the device.
69 WEB UI Window WEB UI Window Description Tabs Toggle Information, Settings and SD Card pages Status Indicators Indicate Wi-Fi router status including connection status Connect, Language and Logout Connect to network, select language and log in/out WEB UI Menus Toggle information/setting pages Information/Setting Area Show current information and settings for functions Settings Item SoftBank 203Z
70 Tabs, Menus, and Information/Setting Area Item Description Information Show menus for Status (Information screen) Settings Show menus for Settings (Settings screen) SD Card Show menus for SD Card (SD Card screen) Menus Toggle information/setting screens Information/Setting Area Show current information and settings for functions Status Indicators Item Description Network Type Network type currently connected (4G, LTE, 3G) Network Operator Name Show network operator name Signal Strengt
71 Connect, Language, and Logout Item Description Connect Connect to network according to settings Language Select language Logout Log out from WEB UI Settings SoftBank 203Z
72 Checking Device Information Check device information, system information, current information on network conditions, amount of data uploaded/downloaded, and information on manuals and customer support. Device information, information on manuals and customer support can be accessed directly from Login window in WEB UI. Device Information Check device information of Wi-Fi router such as Phone Number, SSID (Network Name), Software Version, Hardware Version, etc.
73 Statistics Confirm communication speed, connected time, data transfer volumes, etc. ・Values for data transfer volumes are approximates. In Information screen, Statistics Settings Statistics screen appears. ・Click Reset to reset the connected time and values for data transfer volumes.
74 Connected Devices Confirm Host name and MAC address of devices currently connected. In Information screen, List of Connected Devices List of Connected Devices screen appears.
75 Message Confirm received message. In Information screen, Message Settings Message screen appears.
76 Support Information (Help) Show URLs for Manual Download and ZTE Support Information. In Information screen, Help Help screen appears.
77 Sharing SD Card, Managing Files Set the sharing mode of SD Card. Also, check files stored in SD Card through WEB UI, and add or delete files to/from SD Card. Sharing SD Card Data There are two methods for sharing SD Card; USB and HTTP. Select USB to use Wi-Fi router as a Flash memory when connecting to PC with Micro USB Cable. Select HTTP to transfer data between SD Card and PC through WEB UI. The range of content and access rights for SD card can also be set.
78 Set SD Card Settings Apply The settings are applied. ・If Share Setting is set to Enable , "View SD Card" appears on Login window, and files/folders can be viewed and managed without logging in. Enter password in SD Card Security Settings as required Apply New password is set. ・When password is not set, "Current Password" field is grayed out. ・Note down the password so as not to forget it.
79 View Data in SD Card Show list of data in SD Card in WEB UI. Operations are based on Mode set to HTTP and Sharing Setting set to Enable in SD Card. Activate WEB UI. Login window appears. View SD Card Settings List of files and folders in SD Card appears on HTTP screen. ・Input Password window appears when password has been set. Enter password and click Apply . ・To show data in SD Card after login, click SD Card HTTP after login.
80 Click folder name to check. Files and folders in the selected folder are shown. ・Click Root to go back to the root directory. ・Click Back to go back to the upper directory. ・Click New and enter name to make a new folder in the shown directory. ・Click Rename of a file or folder to modify the name. ・Click Back to Login to go back to Login window.
81 Saving Data in SD Card to PC Save data in SD Card to PC. Click download icon ( ) of the file to save Settings Save as Specify the destination folder Save After selected file is saved to the specified folder, a download completion message appears. ・Method to specify the destination folder may vary depending on browser. ・Do not reload the page while downloading the file.
82 Saving Data to SD Card Save data in PC to SD Card.
83 Browse Settings Dialog box for specifying a file to save appears. Select a file to save.
84 Upload A saving completion message appears; the file name is added to the list. ・Do not reload page while saving a file. ・File more than 2 GB cannot be uploaded.
85 Deleting Files from SD Card Delete files or folders in SD Card. Add check mark to the box at the beginning of each file or folder to delete. Settings ・By moving from this list page to a different page, added check marks become invalid. ・Add or remove a check mark in the title row to add or remove check marks for all of the boxes shown.
86 Delete Confirmation message appears. ・Click Delete All to delete all data in SD Card. Yes Deletion starts.
87 Quick Settings In Quick Settings, set required main items via a wizard to use Wi-Fi router. Settings made in Quick Settings can be altered later. Use other menus to make detailed settings. Quick Settings In Settings screen, Quick Settings Settings Quick Settings screen appears. Confirm information Next SSID Configuration screen appears.
88 Set SSID name and enable/disable SSID Stealth Next Security Setting screen appears. ・Currently selected Network Name (SSID) is shown in Network Name (SSID) field. Select Authentication Method and Encryption Method, and set Security Key Next Setting Confirmation screen appears. Confirm the settings Apply The settings are applied and Display returns to Quick Setting screen. ・Return to corresponding screens using Previous to change the settings.
89 Setting 4G/LTE/3G Configure 4G/LTE/3G network connection. Network Settings Items to be set in Network Settings are as follows. Setting item Description Network Operator In Settings screen, Set how to select (automatic/manual) the network operator Network Settings Network Operator Settings Network Operator Select screen appears. Select Network Operator Apply ・When "Manual" is selected, Apply changes to Search . Search Select available network operator Apply to set a network operator.
90 APN Set Access Point Name (APN) as an initial profile. Also, create, edit, and delete profiles (connection settings). In Settings screen, Network Settings APN APN screen appears. Select a profile Set as default Selected profile is set to initial profile. ・Set APN of DATA SUB with the same steps.
91 Saving New Profiles Items to be set are as follows. Setting item Description Profile Already saved profiles appear in pull-down list Profile Name Enter profile names APN Enter APN Authentication Select authentication method User Name Enter user name Password Enter password In Settings screen, Network Settigns APN Settings APN screen appears. Add New SoftBank 203Z APN Setting screen appears.
92 Set each item Apply Confirmation screen appears. ・To cancel the settings, click Cancel .
93 Editing Saved Profiles Edit already saved profiles. ・The initial profile set by default and the profile currently used cannot be edited. In Settings screen, Network Settings APN Settings APN screen appears.
94 Edit each item Apply Edited APN is applied. ・To save as initial profile, click Set as default .
95 Deleting Saved Profiles Delete already saved profiles. ・The initial profile set by default and the profile currently used cannot be deleted. In Settings screen, Network Settings APN Settings APN screen appears. Select the profile to be deleted SoftBank 203Z Confirmation screen appears.
96 OK The selected profile is deleted. Overseas Roaming Overseas, roaming service for 3G network is available. In Settings screen, Network Settings Overseas Roaming Overseas Roaming screen appears. Select On/Off Apply The selected mode is applied. Cautions for Use Overseas After moving from overseas to Japan, power off and restart.
97 Setup of Data Traffic Set whether or not to show data traffic on Display of Wi-Fi router. Also, set maximum data and date to reset the traffic volume. Showing Data Traffic on Display of Wi-Fi router Show data traffic on Display of Wi-Fi router. In Settings screen, Setup of Data Traffic Settings Setup of Data Traffic screen appears.
98 Setting Maximum Traffic and Reset Date Configure maximum traffic and auto reset date of the traffic accumulated. Maximum traffic does not mean the amount of available data traffic. Use this value as a measure of usage. In Settings screen, Setup of Data traffic Setup of Data Traffic screen appears. Set each item Apply Settings are applied. ・Setting auto reset date to 31 resets the data on the last day of the month even when the last day is not the 31st.
99 Internet Wi-Fi Use Wi-Fi router to connect to Wi-Fi routers at home and work, and to SoftBank Wi-Fi spots to connect to the Internet. This Internet connection is described here as "Internet Wi-Fi." Basic Settings for Internet Wi-Fi Configure basic settings for Internet Wi-Fi connection. Disable Multi SSID in advance to configure Internet Wi-Fi. See "LAN Wi-Fi" for details. In Settings screen, Internet Wi-Fi Internet Wi-Fi Settings Internet Wi-Fi Setting screen appears.
100 SoftBank Wi-Fi Spot Setting In Settings screen, Internet Wi-Fi Internet Wi-Fi Internet Wi-Fi Settings screen appears. Set each item for SoftBank Wi-Fi Spot Setting Apply Settings are applied. ・Select Enable then enter password. Password is the four-digit password set in your contract.
101 Connecting to Profile To connect profiles, Internet Wi-Fi Settings needs to be Enable . Configure up to 30 profiles. In Settings screen, Internet Wi-Fi Internet Wi-Fi Settings Internet Wi-Fi Settings screen appears. Select desired profile to connect with via Wi-Fi Connect Confirmation screen appears. Yes SoftBank 203Z Wi-Fi router connects to Internet with the selected profile.
102 Adding Profiles To show the profile list, Internet Wi-Fi Settings needs to be Enable . Add up to 26 profiles. In Settings screen, Internet Wi-Fi Internet Wi-Fi Internet Wi-Fi Settings screen appears. Add in Wireless Network Scan is performed and Add Wi-Fi Hotspot screen appears.
103 Configure each item or select a profile from the list Apply Selected profile is added to the Wireless Network list. ・If SSID to be added is not shown, click Refresh to refresh the profile list.
104 Editing Profiles To show the profile list, Internet Wi-Fi Settings needs to be Enable . In Settings screen, Internet Wi-Fi Internet Wi-Fi Internet Wi-Fi Settings screen appears. Select the profile to be edited Edit Wi-Fi Spot Editing screen appears.
105 Edit as necessary Apply Changes are applied.
106 Deleting Profiles To show the profile list, Internet Wi-Fi Settings needs to be Enable . In Settings screen, Internet Wi-Fi Internet Wi-Fi Internet Wi-Fi Settings screen appears. Select the profile to be deleted Confirmation screen appears. Yes The selected profile is deleted.
107 Setting WPS Connection Method (WPS) In Settings screen, Internet Wi-Fi WPS Settings WPS screen appears. Select WPS connection method Apply The settings become effective. ・If "PIN" is selected, click Get PIN to get PIN code. Precaution for Changing Internet Wi-Fi Settings Using WEB UI to change Internet Wi-Fi Settings while Wi-Fi router is wirelessly connected to the device may close the WLAN connection. Reconnect Wi-Fi router to re-establish WLAN connection.
108 LAN Wi-Fi Wi-Fi router can establish WLAN connections for PCs, smartphones, and game devices. This WLAN connection is referred to as "LAN WiFi." Connected devices access the Internet via Internet Wi-Fi on Wi-Fi router. Basic Settings for WLAN Set Multi SSID and SSID for Wi-Fi router. Disable Internet Wi-Fi in advance to configure Multi SSID. See "Internet Wi-Fi" for details. Items to be set are as follows.
109 In Settings screen, LAN Wi-Fi Basic Settings Settings Basic Settings of LAN Wi-Fi screen appears. Select Enable / Disable in Multi SSID Apply When selecting Enable , confirmation message appears. When selecting Disable , setting is applied. ・When selecting Enable , Following items are shown; Multi SSID Isolation and whether or not to enable the clients with SSID B access to the WEB UI. Select Enable in Multi SSID Isolation to enable SSID A and SSID B to communicate with one another.
110 Configure each item in SSID 1 Apply Settings are applied. ・If selecting Enable in Multi SSID, setting items of SSID B appear. ・If selecting Enable in Multi SSID, connecting to WPS supported devices in WPS mode is not possible. ・If Multi SSID is enabled, maximum communication speed may decrease depending on the number of WLAN devices connected to Wi-Fi router.
111 Advanced Settings Items to be set are as follows. Setting item Description Network Mode Select WLAN network mode. Frequency Bandwidth Select frequency bandwidth of 20 MHz or 40 MHz. Country/Region Code Select country or region code from the list. Change this item to use Wi-Fi router in overseas. Channel Select channel from Auto (1-11) or Auto (1-13).
112 Configure each item Settings are applied.
113 Configuring Settings for Connecting WPS Supported WLAN Devices Configure WPS function to use. To connect WPS supported WLAN devices, see "Connecting WPS Supported WLAN Devices." In Settings screen, LAN Wi-Fi WPS Settings WPS Setting screen appears. Configure each item Apply Settings are applied and WPS function is available. ・If "PIN" is selected in WPS, enter eight-digit number generated by connecting device.
114 MAC Address Filtering Save WLAN device MAC addresses to be restricted from connecting to Wi-Fi router. Save up to ten addresses. In Settings screen, LAN Wi-Fi MAC Address Filtering Setting for MAC address filtering screen appears. Select Enable / Disable in Blacklist Switch Apply When setting Disable , setting is complete. ・Go to step to block devices currently connected. Skip to step to add new MAC addresses.
115 Click Block for the MAC address in List of Connected Devices. Blocked MAC address is deleted from List of Connected Devices and added to Black list. Apply Settings Enter MAC address of WLAN device to block Entered MAC address is added to Black list.
116 Deleting MAC Addresses Set for Packet Filtering In Settings screen, LAN Wi-Fi MAC Address Filtering Setting for MAC address filtering screen appears. In Black list, click Delete to the right of the MAC address to be deleted. The MAC address is deleted from Black list, and is no longer subject to filtering. Precaution for Changing LAN Wi-Fi Settings Using WEB UI to change LAN Wi-Fi Settings while Wi-Fi router is wirelessly connected to the device may close the WLAN connection.
117 Firewall Configure IP/Port Filtering, Port Mapping, etc. Setting IP/Port Filtering Set/apply rules for connecting or not by specifying IP addresses and port numbers. Items are as follows. Setting Item Description IP/Port Filtering Select a function mode for IP/Port Filtering Default Policy Set action for IP/Port Filtering Source IP Address Set source IP address to apply rules Dest.
118 Set Basic Settings Apply If IP/Port Filtering is set to Disable , the setting is complete. ・If IP/Port Filtering is set to Enable , IP/Port Filtering Settings field appears. Configure IP/Port Filtering Setting Apply Applied rules appear in IP/Port filtering rules that you have set up. ・Set up to ten rules. ・To delete specific rules, check the check box corresponding to the rules to delete and click Delete . ・Select Disable in IP/Port Filtering to disable all the rules.
119 Setting Port Mapping Set rules so that access from Internet to specific devices in the LAN can be controlled. Set up to ten rules. Items are as follows. Setting Item Description Basic Settings Select Port Forwarding action mode Src. Port Set port numbers to open Dest. IP Address Set IP address of device to open port Dest.
120 Configure each item in Port Mapping Settings Apply Applied Port Mapping rules appear on Current Port Mapping Rules in System list. ・To delete specific rules, check the checkbox corresponding to the rules to delete and click Delete . ・Select Disable in Basic Settings to disable all the rules.
121 Setting UPnP Select Enable / Disable UPnP (Universal Plug and Play) function. In Settings screen, Firewall UPnP Settings UPnP screen appears. Select Enable / Disable in UPnP Settings Apply Setting is applied.
122 Settings for Router Configure router settings. LAN Interface Setup (Router) Items are as follows. Setting Item Description IP Address Set private IP address Subnet Mask Set subnet mask DHCP Server Select DHCP server function mode DHCP IP Pool Set DHCP IP pool starting address and ending address DHCP Lease Time Set IP address lease time In Settings screen, Router Settings Router screen appears.
123 Configure each item Apply Settings are saved. ・Restart Wi-Fi router to activate saved settings.
124 Settings for Ethernet Configure settings to connect the Internet using Ethernet. Configure Ethernet Mode to select the way to connect the Internet when disconnecting from an Ethernet network. Configure Ethernet Settings to select IP address acquisition mode (Automatic/Manual) to connect the Internet through an Ethernet network. Ethernet Mode Set Ethernet Mode to Normal Mode or Wi-Fi Priority Mode. In Settings screen, Ethernet Ethernet screen appears.
125 Ethernet Settings Configure the following items to obtain IP address manually. Setting item Description IP Address Set IP address for WAN interface. Subnet Mask Set subnet mask. Default Gateway Set default gateway for WAN interface. Primary DNS Server Address Set the first DNS address for WAN interface. Secondary DNS Server Address Set the second DNS address for WAN interface. In Settings screen, Ethernet Settings Ethernet screen appears.
126 Configure each item Apply Settings are applied Precaution for Setting Ethernet If Wi-Fi has been selected, a delay will occur when starting communication after disconnecting the Ethernet network.
127 Advanced Settings Configure settings such as connection mode, Administrator Password, Sleep Timer, etc. Mode Switch Select a connection mode (Router Mode/Bridge Mode). In Settings screen, Advanced Mode Switch Settings Mode Switch screen appears. Select Router Mode / Bridge Mode Apply Setting is applied.
128 Account Management (Password) Change password entry for logging in to WEB UI. By default, the setting is "admin." Setting items are as follows. Setting item Description Current Password Enter current Password New Password Enter a new Password Confirm New Password Enter the new Password for confirmation In Settings screen, Advanced Account Management Account Management screen appears. Enter for each item Setting is applied.
129 PIN Management Personal Identification Number (PIN) is the USIM security code. Change PIN, or Enable/Disable PIN Authentication to control USIM access. By default, PIN code of USIM Card is set to "9999." ・Note that once PIN Authentication enabled, Wi-Fi router is not available unless PIN is entered to connect to PC. ・Incorrectly entering PIN three consecutive times activates PIN Lock. PUK Code is required to unlock it. For details about PUK, contact Customer Service.
130 Resetting the Settings Reset all Wi-Fi router settings to their factory defaults. Following information are not restored; data in USIM Card, data in SD Card, software version if it is updated. In Settings screen, Advanced Reset Reset screen appears. Reset Confirmation message appears. Yes Reset all Wi-Fi router settings to their factory defaults. ・Click No to cancel it.
131 Sleep Timer Setting (Sleep Mode) If not using or charging Wi-Fi router for a while with no connected WLAN devices, Wi-Fi router enters Sleep mode after Display has turned off to save power. By default, it is set to 1 minute. In Settings screen, Advanced Sleep Timer Setting Settings Wi-Fi Sleep Settings screen appears. Select Sleep Time Apply Setting is applied.
132 Software Update Execute Software Update. If Automatic Download is set to Enable , Wi-Fi router periodically checks for updates, and when new updates are available, it automatically updates the software. If it is set to Disable , it checks for updates but does not update automatically. ・Packet fees are not incurred for software updating. ・Other functions are not available while software is being updated. In Settings screen, Advanced Software Update Software Update Information screen appears.
133 Mobile Utility Access WEB UI via smartphone to show WEB UI for mobile. Activating WEB UI via Mobile Devices Make sure mobile devices are properly connected to Wi-Fi router via WLAN ・See "WLAN(Wi-Fi)" for WLAN connection. On Wi-Fi router, Touch Select 情報 and Touch Select WEB UI URL and Touch URL of WEB UI is shown In Display. Enter URL in browser's Address Bar Settings WEB UI Home screen appears.
134 Logging in to WEB UI via Mobile Devices In Home screen, Tap Quick Setting , Basic Status or SD Card Login screen appears. Enter administrator password Login A screen for the menu Tapped in step appears. ・Administrator password is set to "admin" by default. See "Account Management (Password).
135 WEB UI Window for Mobile Item Description Quick Setting Show Quick Setting screen Basic Status Show Basic Status screen SD Card Show SD Card screen Customer Support Jump to Customer Support Page User Manual Jump to Manual download Page WEB UI for PC Show WEB UI screen for PC Language Select language Logout Log out WEB UI Settings Some functions are unavailable depending on browser Precaution for Changing Wi-Fi Settings Using WEB UI to change Internet Wi-Fi or LAN Wi-Fi Settings whil
136
Appendix Troubleshooting.............................................................. 138 Specifications..................................................................140 Settings on WEB UI........................................................141 Glossary........................................................................... 148 Warranty & Service........................................................ 149 Customer Service............................................................
138 Troubleshooting Troubleshooting If problems remain unresolved even after the following troubleshooting, contact a SoftBank Shop or Customer Service, General Information. Troubleshooting Q. Unable to connect WLAN A. Make sure Wi-Fi router is properly connected to PC. A. If WPS connection fails, see WLAN device user guide. If still unable to connect, set Wi-Fi router manually. See "WLAN (Wi-Fi)." A. To connect WPS PIN specified WLAN device, confirm PIN.
139 Q. PC does not recognize Wi-Fi router Q. Internet connection fails A. Make sure Wi-Fi router is properly connected to PC. A. Make sure you are within the service area. A. Remove Wi-Fi router from PC, restart PC, then A. If signal reception is poor, move to where signal is reconnect Wi-Fi router. strong, then reconnect. A. For Windows 8, follow these steps to confirm proper Wi-Fi router installation. Desktop Properties Explorer of day, wait a little while then reconnect.
140 Specifications Q. "Out of Service" appears outside Japan A. Power off and restart. 203Z Q. Resetting factory defaults (Reset) Item A. Select menu on Wi-Fi router to reset. See "Resetting to Model Name Factory Settings." A. To reset the settings via WEB UI. See "Resetting the Settings." Dimensions 1 Weight 1 Q. Old phone number appears in WEB UI. Interface A. Depending on contract/cancellation method, old phone number may appear in WEB UI. Power Consumption 1 Q. Performance is unstable A.
141 Settings on WEB UI Micro USB Cable Item Description Model Name Micro USB Cable (ZEDAD1) Cable Length 1200 mm Plug Type Standard-A, micro-B Charging Temperature Followings are the settings on WEB UI. Options and default values for setting items in Settings screen and SD Card screen are shown. If accessing WEB UI through a mobile device, some items or names may be modified or omitted.
142 Items SSID Setting Setting Range/Default Items Setting Range/Default SSID Profile Name - Options: Alphanumeric characters and - Options: Alphanumeric characters and symbols (! # ( ) + - .
143 Items Setting Range/Default Items Maximum traffic - Options: 0 to 999, KB/MB/GB Setup of Data traffic Internet Wi-Fi Internet Wi-Fi - Default: 2 GB - Default: 31 ・Internet Wi-Fi > Internet Wi-Fi - Options: Enable, Disable - Default: Enable SoftBank Wi-Fi Spot Setting Auto reset date - Options: 1 to 31 Setting Range/Default - Options: Enable, Disable SoftBank - Default: Enable Wi-Fi Spot Setting Password - Options: 0000 to 9999 - Default: (none) 1 Profile - Options: Alphanumeric characters a
144 Items Setting Range/Default Items Setting Range/Default WPS Multi SSID - Options: PBC, PIN - Options: Enable, Disable - Default: (none) WPS - Default: Disable Basic Settings PIN Multi SSID Isolation - Options: 8 decimal digits - Options: Enable, Disable - Default: (none) - Default: Disable Network Name (SSID) ・LAN Wi-Fi > Basic Settings - Options: Alphanumeric characters and symbols (! # ( ) + - .
145 SSID Items - Options: Alphanumeric characters and Network Mode symbols (! # ( ) + - .
146 Items Setting Range/Default Items IP/Port Filtering - Options: Enable, Disable UPnP Settings UPnP Settings - Default: Disable Basic Settings Default Policy - Options: Accepted, Forbidden - Default: Accepted ・Router Settings Items - Options: Number of four sets of 0 to 255 255 - Default: 192.168.128.1 - Default: (none) Subnet Mask Dest. IP Address - Options: Number of four sets of 0 to - Options: Number of four sets of 0 to 255 255 - Default: 255.255.255.
147 Items Setting Range/Default ・Advanced > PIN Management Ethernet Mode Ethernet - Options: Normal Mode, Wi-Fi Priority Mode Mode Items PIN Status - Options: Enable, Disable - Default: Normal Mode - Default: Disable IP Address Acquisition Mode - Options: Automatic, Manual Current PIN - Default: Automatic - Options: Four to eight-digit number - Default: (none) 1 IP Address - Options: Number of four sets of 0 to 255 - Default: (none) New PIN PIN Management Subnet Mask - Default: (none) -
148 Glossary The name used to identify a WLAN access Glossary SSID point. If there is more than one wireless (Service Set LAN access point in the communication IDentifier) range, specify the access point to be connected to. Term Description Install in Wi-Fi router to use. Information USIM Card (Dual Cell High Speed Downlink Packet An extended standard for data receiving which has sped up the W-CDMA that is used in mobile phones.
149 Warranty & Service Customer Service For SoftBank Wi-Fi router or service information, call General Warranty Wi-Fi router purchase includes Warranty. Information. For repairs, call Customer Assistance. SoftBank Customer Support ・Confirm shop name and purchase date. ・Read contents of Warranty and keep it in a safe place. ・Check warranty period in the Warranty.
150
Safety Precautions Safety Precautions......................................................... 152 General Notes................................................................. 158 RF Exposure Information/Specific Absorption Rate (SAR) Information.....................................................................
152 Safety Precautions Read safety precautions before using Wi-Fi router. Wi-Fi Router, USIM Card, AC Charger, Micro USB Cable Observe precautions to avoid injury to self or others, or damage to property. SoftBank Mobile Corp. is not liable for any damages resulting from use of this product. Labels & Symbols Use SoftBank specified devices (AC Charger or Micro USB Cable) only. These labels indicate the degree of risk from improper use.
153 Do not place Wi-Fi router, AC Charger, or Micro USB Cable in a microwave oven or pressure cooker, or on an induction cooktop. Do not place Wi-Fi router on an uneven or unstable surface. May cause Internal Battery to leak, overheat, rupture or malfunctions. Wi-Fi router may fall, leading to injuries or Wi-Fi router ignite; or may cause Wi-Fi router, AC Charger, Micro USB Cable to overheat, emit smoke, ignite or malfunction. Keep Wi-Fi router out of reach of infants.
154 Do not sit down with Wi-Fi router in your trousers pocket. Do not dispose of Internal Battery as municipal waste. Excess weight may damage Display, Internal Battery or Bring used Internal Battery to a SoftBank Shop. other parts resulting in overheating, fire or injury. Keep Wi-Fi router power off near high precision electronic devices or devices using weak signals. Wi-Fi router may cause these devices to malfunction.
155 USIM Card & SD Card AC Charger & Micro USB Cable Do not insert objects other than SD Card into SD Card Slot. Do not cover or wrap with clothing or bedding during charging. Doing so may cause overheating, electric shock or Heat may build up resulting in fire or malfunction. malfunction. Do not subject SD Card to vibration or shock or remove it from Slot while data is being written onto or read from SD Card. Doing so may cause data loss or malfunction. Use the specified power supply and voltage.
156 Do not plug/unplug AC Charger with wet hands. May cause electric shock or malfunction. Firmly hold plug and unplug AC Charger from outlet before cleaning. Failing to do so may cause electric shock. If thunder is audible, do not touch AC Charger. May cause electric shock. Do not unplug AC Charger by pulling the cord. Firmly hold plug and unplug AC Charger. Pulling the cord may damage the cord resulting in electric Supplied Micro USB Cable is only for charging Wi-Fi router.
157 Do not use AC outlet damaged or its plug is loose. Wi-Fi Router Use & Electronic Medical Equipment Keep Wi-Fi router a minimum of 15 centimeters away from implanted cardiac pacemakers or implanted defibrillators. Radio waves may interfere with the operation of implanted cardiac pacemakers or implanted defibrillators.
158 General Notes General Use Wi-Fi (Wireless LAN) ・Precautions Do not use Wi-Fi (WLAN) near devices emitting electromagnetic waves such as electrical appliances or AV/ OA equipment. ・With the exception of specialized models, SoftBank 4G ・Electromagnetic noise (e.g. from microwave ovens) may services are unavailable. impair or disable communications. ・Wi-Fi router accommodates software updates. Use the ・Using Wi-Fi (WLAN) near a TV or radio, etc. may cause latest software.
159 RF Exposure Information/Specific Absorption Rate (SAR) Information FCC RF Exposure Information Your handset is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits Specific Absorption Rate (SAR) Information for this Product ・This product "203Z" meets international guidelines on radio wave protection. This product is designed to abide by permitted levels for radio wave protection as recommended by international guidelines.
160 European RF Exposure Information Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health. The guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR.
161 A Activating WLAN (Wi-Fi) Function..................................32 Advanced Settings..........................................................127 C Charging Battery.............................................................. 11 Charging Mobile Phone or Smartphone........................... 13 203Z User Guide Index Checking Device Information........................................... 72 Confirming on Wi-Fi router............................................. 26 Connecting Android™ Device........
162 P Parts & Functions...............................................................6 Power On/Off................................................................... 14 Q Quick Settings.................................................................. 87 R RF Exposure Information/Specific Absorption Rate (SAR) Information..................................................................... 159 S Safety Precautions......................................................... 152 SD Card.....................
SoftBank 203Z User Guide October 2013, First Edition SoftBank Mobile Corp.