Datasheet

7373
Built in remote control options
On nearly every projector lift you want to use
an external control. This can be an AMX or
Crestron automation system, a wall switch
or a wireless device.
All PPL lift systems are as standard equipped with
a control box offering 5 in and outputs for remote
control. This gives you maximum flexibility to
control the lifts system.
Three height positions
Most lift systems offer only two height positions,
Home and Show. Vogel’s PPL lift systems offer a
third position, Service. This position will bring the
projector all the way down to a comfortable height
to make quick and easy projector service possible.
Electronic height positioning
The electronic height positioning is very accurate,
also on long term, resulting in an always exact
positioned projector image. The second advantage
is that you can set the height positions remote.
There is no need to climb up to the projector
anymore. You can even set the positions from
a control room.
Special cable drum
All PPL lift systems have a special grooved cable drum and
pinch rollers. This ensures that the steel cables are always
in the same position on the cable drum, keeping the
projector and image exactly positioned. With traditional tube
motors there is the risk cables wind back over each other
resulting in a mis-balance of the projector and image.
The grooved cable drum prevents this.
Cable management
Cable clips make it possible to secure
the projector power and signal cables
safely to scissors.
Unique cable safety sensor
If the descending platform is blocked
for some reason the cables could run
of the cable drum. The cable safety
sensor prevents this. If the steel cables
do not run straight down and make
contact with the sensor, the lift will
automatically stop.
Self diagnostics
The built in self diagnostics, with
indication LED, constantly monitors
the operation of the lift system.
PPL 2525
LIFT SYSTEMS
LIFT SYSTEMS