Operating instructions

ENGLISH

Four Button Infrared Remote – Instructions for use

Projector Lift Version

Operation

When power is applied to the control box the IR Remote will boot up. The green LED will blink 20 times. The Red LED provides projector

lift codes. Consult the Projector Lift Manual for LED lift codes.

The IR remote will default to automatic mode (Up, Down, Stop). Basic functions (UP, DOWN, STOP) activate by pressing the button

for 1 second.

NOTE:

For accurate programming of lift show and service positions we recommend using the hardwired remote provided with the lift.

The electronic Lower Limit cannot be reset with the IR Remote.

STOP

DOWN

HIDDEN

Basic Control

Function Button

Go to Home position (all the way up) UP ARROW

Go to Show position (1st programmed position) DOWN ARROW

Stop Movement STOP Button (Red)

Go to Service Position (2nd programmed position) Hold HIDDEN for one second, release,

then press and release DOWN

Enter Manual Mode Press HIDDEN for 5 seconds, release,

then press STOP for 5 seconds

(Green LED will blink slowly)