Operating instructions

Programming Mode
The following functions will work only after entering Manual Mode.
Function Button
Set Show position (all the way up) Press HIDDEN for 1 second, release,
then press UP button
Set Maintenance position Press HIDDEN second, release,
then press DOWN button
Exit Manual Mode Press HIDDEN for 1 second, release,
then press STOP Button (Red)
Error Correction
Stop Error blinks Press & hold STOP button for 10 seconds
Override 7 Blinks Press & hold STOP button for 10 seconds,
Release, then press & hold HIDDEN for
5 seconds, release,
press UP button.
Specifications
CE tested according compliance test
EN 61000-6-1:2001& EN 61000-6-3: 2007
Operation: 5-10 meter
Power: 5 Volts DC, 100mA
Battery : 2 x type AA Alkaline
IR: 38Khz
3