TVM 3460 Series TVM 3660 Series Full Installation Guide Everything you need to get your TV safely on the wall, in no time Before you start …we just wanted to say thanks for choosing Vogel’s. Smart choice. And you’re already making another smart choice – reading the manual! Keep reading to learn all about safe, efficient installation, and how to use your new mount.
Stay safe Warning Always read these safety instructions carefully before installing and using this product. Following these instructions is strictly required. Incorrect mounting and/or installation could put you, your TV, and your family at substantial risk. Don’t dare risk it… Read all l l l l l l l l l Vogel’s recommends that the mounting and/or installation of this product should be carried out by a suitably qualified expert.
What’s in your box? l Something missing? Make sure your packaging has everything in place: A. Wall mount B. Interface bars C. Interface clips D. Safety instructions E. Bolts for fastening strips on TV (see contents below) F. Spacers G. Washers Ø 18 mm H. Screws I. Plugs (fischer© DuoPower) J. Washers Ø 22 mm K. Covers L. Protective TV patches M. Cable clips N. Cable clip for wall plate O. Spirit level P. Thumbnut Q. Clip covers R.
l Contents of the TV fasteners kit: l 4x M6*12mm bolts l 4x M6*25mm bolts l 4x M6*35mm bolts l 4x M8*12mm bolts l 4x M8*25mm bolts l 4x M8*45mm bolts l 4x M6 washer l 4x spacer 10mm l 4x spacer 5mm You don't need all fasteners to mount your TV.
l 5 mm or 13/64” wood drill (for wooden walls only) l Stud finder (optional) l Socket wrench no.
Ready… set… get installing! Step 1: Attach the clips to the TV 1. Carefully place the TV face down, on a clean surface without any obstacles. 2. Fix the protective TV patches Ⓛ onto the interface clips Ⓒ. Screw the interface clips Ⓒ onto the TV with the bolts Ⓔ and the hole reducers Ⓡ. Are you missing any bolts? Or need different ones? The friendly team at Vogel’s Consumer Care are waiting to help: vogels.com/contact Make sure bolts and spacers are positioned correctly.
Refer to the user manual of your TV for the correct mounting material. 3. Loosen the pre-attached bolts Ⓒ with the allen key Ⓞ. 4. Remove both thumbnuts Ⓟ from the interface bars Ⓑ. 5. Slide the lower interface bar Ⓑ through the designated spacing of the interface clips Ⓒ. Make sure the interface bar Ⓑ is placed in a centered position. Notice the holes on the side of this interface bar Ⓑ. They need to face downwards. 6.
TVM 3460/3660 Series - English 8
Step 2: Attach the wall mount to the wall How well do you know your walls? What they’re made of matters more than you think… Concrete/Brick wall Don’t drill yet! Try our free DrillRight™ AR app to find just the right height and mark the first hole, easily. 1. Find the perfect spot for drilling with our DrillRight™ AR app and the included drilling template. 2. Drill the holes.
How deep do you drill? Check the length of the screw (not the plug!) to find the right depth – this stops things from breaking. 3. Attach the wall mount Ⓐ to the wall with the screws Ⓗ, washers Ⓙ and plugs Ⓘ. Use the spirit level to level the wall mount. Lubricate the screws for easy screwing in.
4. Place the covers Ⓚ.
Wooden wall with studs Don’t drill yet! Try our free DrillRight™ AR app to find just the right height and mark the first hole, easily. 1. Don’t just guess! Always use a stud finder to determine the position of studs. 2. Find the perfect spot for drilling with our DrillRight™ AR app and the included drilling template. Don’t destroy your belongings! The wall mount must always be attached to the studs. 3. Now for the fun part… drilling the holes.
4. Attach the wall mount Ⓐ to the wooden wall with the screws Ⓗ and washers Ⓙ. Use the spirit level to level the wall mount. Lubricate the screws for easy screwing in.
5. Place the covers Ⓚ. Other wall type/I don’t know my wall type If your wall is a little special – for example, hollow bricks, metal stud walls, wood panels or plasterboard – or you simply aren’t sure, don’t worry! Just ask your installer, specialist supplier or the Vogel’s Consumer Care team at www.vogels.com/contact.
Step 3: Attach the TV to the wall mount 1. Carefully lift and attach the TV to the wall mount Ⓐ. 2. Attach the TV with the interface bars Ⓑ and clips Ⓒ to the wall mount Ⓐ. 3. Fasten the thumbnut Ⓟ. Make sure the TV is levelled, using the spirit level.
Lifting your TV is a two-person job. Don’t be bold! Job done now! Enjoy watching your TV! Handy features Having a cable mess? Do you need inspiration about how to hide and guide your cables or how to place other TV accessories? Take a look at our website vogels.com! Tilt to avoid reflections 1. Click the TiltAnchor™ button to release the TV from home position. 2. Adjust the tilt angle.
Be careful. This is a two-person job! Guide your cables 1. Guide the cables. 2. Place the cable clip Ⓜ on the arm, where needed. 3. Place the cable clip Ⓝ on the wall plate.
Vertical correction 1. If the tilt option is not used and the screen still tilts downwards/upwards: tighten/loosen screw Ⓢ.
Removing your TV 1. Remove the lower thumbnut Ⓟ and loosen upper thumbnut Ⓟ. 2. Remove the TV, and put it down somewhere safe. Again, lifting your TV is a two-person job. Always get help.
Tell us how you feel! Your opinion matters more than you might think. It helps us make better products, and helps other customers make informed choices. Share your feedback, and sign up to win Vogel’s products! Simply visit vogels.com/review for sharing or the Terms and Conditions. Confused? Unsure? Going crazy? There’s plenty of help waiting for you, online: info@vogels.com www.vogels.com/contact facebook.com/ VogelsForSure/ instagram.com/ vogels_official/ www.youtube.
Simple troubleshooting Found a problem you can’t fix? Don’t panic… try these! Problem Cause Solution ‘There are stains on the arms of the wall mount’ The stains are caused by the paper pulp interior in the box. We decided to reduce the amount of plastic in the packaging and therefore there is no plastic bag around the product anymore to prevent from some paper dust on the product. So, these stains might occur, unfortunately. The stains are easy to remove with a cloth.
FAQs ‘Where can I request the correct bolts for my TV (a service kit)?’ Whatever you need, simply contact your local Vogel's dealer or Vogel's. Click here to contact Vogel's Consumer Care. ‘Where can I find installation videos?’ The installation video can be found at the product page of your product on our website. It can also be found on our YouTube channel: www.youtube.com/c/VogelsForSure ‘What if I need spare parts?’ If you require a spare part, please contact your local dealer or Vogel's.
Go green! We care about the planet. If you’re getting rid of the packaging or the TV mount itself, please visit your local recycling facility, or contact your municipal office.
Guarantee Thanks again for choosing Vogel’s! Just like every product we make, your new purchase is made of durable materials and is based on a meticulous design. That is why Vogel’s gives you a 10-year guarantee for defects in materials and manufacturing. 1. Vogel’s guarantees that if during the guarantee period of a product, faults arise due to defects in manufacturing and/or materials, it will, at its discretion, repair or if necessary replace the product, free of charge.
