Operation Manual

Manual Mode Control

The following functions will work only after entering Manual Mode.

Function Button

Set Show position (all the way up) Hold HIDDEN for one second, release,

then press and release UP

Set Maintenance position Hold HIDDEN for one second, release,

then press and release DOWN

Exit Manual Mode Hold HIDDEN for one second, release,

then press and release STOP

Error Correction

Stop Error blinks Press and hold STOP for 10 seconds

Override 7 Blinks Press and hold STOP for 10 seconds,

release, then press and hold HIDDEN for

ﬁve seconds, release, press UP. Lift will

raise, release the limit switch and stop.

LED Indicators

RED LED Same as Lift codes

GREEN LED OFF In Automatic Mode

Slow Blink In Manual Mode

Fast Blink Hidden button pressed for 5 seconds,

waiting for next button push – or-

Fast Blink Conﬁrmation of Set Show/Maintenance

Intermittent Blinking Reception of IR signal

Fast Blink 20 times Powered up

Pin Assignments: DB9 Male to DB9 Female

1 Black - UP

2 Red – DOWN

3 Green – STOP

4 Blue - SET

5 Yellow - OVERRIDE

6 White Common

7 Purple - LED

8 Orange – Safety Switch Override

9 Brown +5V