User's Guide

9 Page / 15
Wireless Interface (WI) ELITE FCC
User Guide V1.0
GB
INTRODUCTION
The instructions given below will make it simple and easy for you to start using your VOKKERO® ELITE Wireless Interface (WI) communication
system.
All of the operations described are shared by the versions of the VOKKERO® ELITE WI product listed below:
VO8161CA
Note: the reference number for your device can be found on the label located on the base of the device.
The system is made up of the following elements:
Wireless Interface box (WI)
A power supply
A radio antenna
An antenna offset kit (optional)
The WI interface makes it possible to operate a VOKKERO® ELITE wireless conference system with a wired communication system. In order to
be able to configure the interface, you will need to link the equipment to a VOKKERO® ELITE configurator/charger. When using it for the first
time, you will need to configure it in order to ensure that the system is compatible with the VOKKERO® ELITE conference system.
All of the WI system’s operational parameters are controlled by the configurator. This lets you access the settings menu via a touchscreen.
AVAILABLE CHANNELS AND USE RESTRICTIONS
To know the frequency channels available in the VOKKER-ELITE-FCC001-WI ELITE FCC - Wireless interface (WI) product, any restrictions on
the use of certain channels, as well as the general operation of the ELITE system (terminals and configurator) please refer to the following
documentation :
• For the wireless interface (WI) reference VO8161CA, the relevant User Guide to refer is DRAFT_VOK_ELITE_FCC_UG_V1.0