User's Guide

/ 30

VOKKERO GUARDIAN US - User Guide V3.0

2.3. Connecting a headset

Several types of headsets from the VOKKERO range can be connected to VOKKERO Guardian. The headset is automati-cally

detected by the terminal when the headset is plugged in.

2.3.1. Plugging in a headset

Plug the headset into the slot at the top of

the product, beside the LCD.

Line up the 2 red marks of the product and

the connector

Note:

Do not force the headset; it should connect

easily; if this is not the case, check the head-

set to make sure it isn’t damaged.

Attention

Do not attempt to remove the headset

by pulling the cable.

Attention

Do not turn the connector

Use the “Micro” icon on the terminal screen to make sure that the headset is properly connected. After disconnection of a head-

set, it is necessary to wait a few moments for the micro icon to be crossed out before reconnecting a headset.

No accessory connected Accessory connected

2.3.2. Removing the headset

To remove the headset

• Firstly, pull on the ring of the headset to release the connector switch.

• Then remove the headset connector

US2