User's Guide

VOKKERO GUARDIAN US - User Guide V3.0

/ 30

2.4.8. Battery

The terminal’s button can be removed and recharged on the charger.

Removing the battery

Remove the battery from the terminal by pressing the locking mechanism at the top of the terminal

and then slide the battery downwards.

Inserting the battery

Slide in the battery at the back of the product; keep pushing until you hear the locking clip.

2.4.9. Belt clip

Removing the belt clip

The terminal comes with a belt clip. However, you can remove this; simply take out the battery, pull on

the locking mechanism in the center of the belt clip, and then slide it downwards.

Attaching the belt clip

Slide the belt clip into the slot; keep pushing until you hear the locking clip.

NOTE : the terminal must always be positioned at the belt.

2.4.7. Side Tone

By default, the side tone is disabled. To activate the side tone, press and hold the centre of the volume knob.

The product then displays the side tone menu. To choose among the following options toggle the trigger:

• Side tone disabled (OFF)

• Side tone volume 1, 2 or 3

The system automatically exits the menu after a few seconds.

We do not recommend using the side tone (especially at high-level) if you use a Push-to-Talk other than the

one you can set up and run on the terminal (if, for example, you use a Push-to-Talk from an accessory headset).