Datasheet

creating connections

Connector IDC 3924n

Connecting plate 3924n.1

Vogt AG Verbindungstechnik · Duschletenstrasse 2–4 · CH-4654 Lostorf / Switzerland

Telefon +41 62 285 75 75 · Telefax +41 62 285 74 74 · www.vogt.ch · www.vogtshop.ch

Simply structured for

single connection.

No stripping, soldering,

screwing or special tools

necessary.

PAGE 1
creating connections Connector IDC 3924n Connecting plate 3924n.1 Simply structured for single connection. No stripping, soldering, screwing or special tools necessary. Vogt AG Verbindungstechnik · Duschletenstrasse 2–4 · CH-4654 Lostorf / Switzerland Telefon +41 62 285 75 75 · Telefax +41 62 285 74 74 · www.vogt.ch · www.vogtshop.
PAGE 2
creating connections creating connections 1 Insert the wire until it reaches the end and use a plier at its open jaw condition. No stripping nessecary. Insert the wire until it reaches the end. Wire Confirm that it is correctly locked. 2 Connectors of the same shape can be connected. The connecting plate (3924n.1) used to lock mating connection. (Sold separatley) Rotate one connector at 180° to make a connection.
PAGE 3
creating connections creating connections Dimension in mm Technical specifications Wire entrance Dimension a: Befor IDC 8.1, after IDC 5.8 Wire Wire size 0.2mm2 - 0.5mm2 Voltage 100V Max. wire outside diameter 2.1mm Current 2A (0.2mm2) Rating UL1007 AWG24-AWG20 Applicable wire standard Package quantity Temperature range -20°C to +75°C Assemble temperature 0°C to +40°C KV (per JIS) 0.2mm2 - 0.5mm2 KIV (per JIS) 0.3mm2 Tool VFS (JIS) 0.3mm2 Material 3A (0.
PAGE 4
creating connections Vogt AG Verbindungstechnik · Duschletenstrasse 2–4 · CH-4654 Lostorf / Switzerland Telefon +41 62 285 75 75 · Telefax +41 62 285 74 74 · www.vogt.ch · www.vogtshop.