User's Guide

EN EN
6-2. Charge with a free USB port on your PC.
5. Charge Your Devices:
The powerbank is compatible with all smartphones, tablets and all USB-Powered device with 5V, 9V, 12V input.
To charge your device with powerbank, plug the USB charging cable into the USB output or Type C output, and
connect the other end to device.
* The supplied charging cable supports all smart devices that has a Type C input. For the smart devices that
have a different input, please use the cable supplied by its manufacturer.
* The Capacity LED on display will light up and one of LEDs will be blinking during charging.
* The Powerbank would automatically shut off in a few seconds after finishing charging.
4. Check Your Powerbank Battery Status from the LED:
Press the Power On/Off Button to check the
remaining capacity.
6. Charge the Powerbank:
We suggest that your fully charging the powerbank before each use. To Charge your powerbank, use one
of the following 2 charging options:
6-1. Charge with a Power Adapter with USB port.
Connect the powerbank to power apdater
USB port with the supplied USB to Type C
Cable directly.
or with your own USB to Micro USB cable.
The battery is low, less than 25% remaining.
PLEASE recharge.
The battery is medium, appx 50% remaining.
Please recharge after several use.
The battery is healthy, appx 75%remaining.
You can take it when you are on-the-go!
The battery is sufficient, more than 75% remaining.
You can take it when you are on-the-go!
5-1. Charge with a USB Cable.
Step 1. Press the power button on the left side until you see the wireless charging LED light up in RED.
Step 2. Place down your Qi-Enabled smart phone on the powerbank surface where you can see a wirless
charging icon.
* The LED light will be blue during charging.
* The LED Light will be red after charging.
5-2. Charge Qi-Enabled Smart phone wirelessly.
>>>
Step 1. Press the power button once, and then press it and hold it for 3 seconds again to activate the small
power charging mode.
Step 2. Place down your Qi-Enabled gadgets on the powerbank surface where you can see a wirless charging
icon.
* The LED light will be blue during charging.
* The LED Light will be red after charging.
5-3. Charge Qi-Enabled Gadgets(TWS, Mouse etc) with Small Wireless Power
>>>
Connect the powerbank to a freeUSB port
on your PC with the supplied USB to Type C
Cable directly.
or with your own USB to Micro USB cable.
IMPORTANT DISPOSAL:
This electrical appliance does not belong in the household waste.
For proper disposal, please contact the public collection in your
community.