User's Manual

Switch to Switch – quick changes for the theatre stage.
VT Switch features a screw thread enabling quick and effortless changing of the microphone capsule. With this technology, the
capsule can easily be changed even when the actor or actress is already costumed and made up. The neckband stays in place,
only the capsule is being changed. It is also possible to switch the polar pattern from omnidirectional to the optional cardioid
microphone. Whether a change in the circumstances demands a switch of polar patterns or a microphone is obstructed by make
up – the VT Switch makes changing and switching easy.
Through its lightweight yet robust construction and its options for adjusting it to certain actresses and actors, the VT Switch
becomes an outstanding microphone for theatre, opera and musical. For additional reliability, a redundant lavalier microphone
can be integrated as a fallback solution.
The VT Switch comes with a light and sturdy zip case, with a strap and a windscreen.
Colors: beige
Application area: Stage - Presentations
Audio Bauer Pro AG, Bernerstrasse-Nord 182, CH-8064 Zürich, Switzerland
Phone: [phone], Email: [e-mail]
VT SWITCH Omni-Headset
Specifications Wiring configuration (2-wire):
Generating Element: Back Electret Condenser Red +VDC
Polar Pattern: Omni-Directional Copper + Transparent Ground
Frequency Range: 50Hz- 20 kHz
Sensitivity: -44dB ±3dB 1V/microbar (6mV/Pa)
Noise Level: +31.5dB SPL „A“ weighted
Max. Input SPL: 130dB
Impedance: 1.5kOhms
Bias/+VDC: 1.3V-10V (max.)
Signal/Noise Ration: more than 60dB @1kHz/Pa „A“ weighted
Colors: beige
Capsule size: Length 11.35mm Ø 5.35mm
Cable: Length 1.2m Ø 2mm
Weight: 17 g