Owner`s manual

Adjusting tone quality and
speaker sound balance
To adjust BASS, TREB (treble), FADER, and
BAL (balance) the control knobs must be
released from their stowed positions. Pushing
the knobs once moves them to the released
position.
In the released position, the knobs control
tone quality. Turn the control knobs to adjust
BASS and TREB to the most pleasing level.
From the released position, the knobs must be
pulled out in order to control FADER and BAL.
FADER adjusts the sound level between the
front and rear speakers, and BAL adjusts the
sound level between the right and left speak-
ers.
Once sound quality is set to the desired levels,
return the control knobs to the stowed posi-
tion by pushing them in completely and
releasing.
RADIO OPERATION
FM·AM band select button
Pushing the FM·AM band select button will
change the band FM1, FM2 or AM.
O When FM·AM band select button is
pushed while the ignition switch is at
‘‘ACC’’ or ‘‘ON’’, the radio will come on at
the station last played.
O The last station played will also come on
when the power button is turned to ON.
O If a compact disc or tape is inserted when
the FM·AM band select button is turned to
ON, the compact disc or tape will auto-
matically be turned off and the last radio
station played will come on.
O The FM stereo indicator ‘‘ST’’ will glow
during FM stereo reception. When the
stereo broadcast signal is weak, the radio
SIH0041
HEATER, AIR CONDITIONER AND AUDIO SYSTEM
3-11
Z 96.12.20/ X