Owner`s manual

CAUTION
O The outside temperature sensor
is installed in the front of the
radiator. The display may not in-
dicate the precise temperature
due to the heat of the road and
engine depending on the direc-
tion of the wind and driving con-
ditions, etc.
O Use the ‘‘ICE’’ indication for ref-
erence only. Confirm the traffic
information and road conditions
to drive safely.
Compass display (If so
equipped)
Push the switch when the ignition key is in the
‘‘ACC’’ or ‘‘ON’’ position. The direction will be
displayed.
Zone variation change proce-
dure
The difference between magnetic north and
geographical north is known as variance. In
some areas, this difference can sometimes be
great enough to cause false compass read-
ings. Follow these instructions to set the
variance for your particular location if this
happens:
1. Establish your location on the zone map.
Record your zone number.
2. Push the ‘‘ON/OFF’’ switch in for five
seconds until the current zone entry num-
ber is displayed.
3. Press the ‘‘ON/OFF’’ switch repeatedly until
the new zone entry number is displayed.
Once the desired zone number is displayed,
stop pressing the ‘‘ON/OFF’’ switch and the
display will show compass direction within a
few seconds.
INSTRUMENTS AND CONTROLS
1-7
Z 96.12.20/ X