Owner`s manual

brake. When parking on a hill, apply the park-
ing brake first, then shift the lever into the ‘‘P’’
position.
‘‘R’’ (Reverse):
Use this position to back up. Always be sure
the vehicle is completely stopped when se-
lecting ‘‘R’’. With the brake pedal depressed,
push in the selector lever button and move the
lever to the ‘‘R’’ position.
‘‘N’’ (Neutral):
Neither forward or reverse gear is engaged.
The engine can be started in this position.
You may shift to ‘‘N’’ and restart a stalled
engine while the vehicle is moving.
‘‘D’’ (Drive):
Use this position for all normal forward
driving.
‘‘2’’ (Second gear):
Use for hill climbing or engine braking on
downhill grades or starting on slippery roads.
Push in the selector lever button and move the
selector lever from the ‘‘D’’ to ‘‘2’’ position.
Do not downshift into the ‘‘2’’ position at
speeds over the following speeds and do not
exceed the following speeds in the ‘‘2’’ position:
H (2WD AUTO):
60 MPH (95 km/h)
H (LOCK):
50 MPH (80 km/h)
4LO:
22 MPH (35 km/h)
‘‘1’’ (Low gear):
Use this position when climbing steep hills
slowly or driving slowly through deep snow,
sand or mud, or for maximum engine braking
on steep downhill grades.
Do not downshift into the ‘‘1’’ position at
speeds over the following speed and do not
exceed the following speeds in the ‘‘1’’ posi-
tion:
H (2WD AUTO):
30 MPH (50 km/h)
H (LOCK):
30 MPH (50 km/h)
4LO:
10 MPH (15 km/h)
SIS0020
STARTING AND DRIVING
4-10
Z 96.12.20/ X