Owner`s manual

3. Check each new spark plug gap with a
feeler gauge. Correct it as required.
4. Install spark plugs.
When installing a plug, turn it in two or
three turns by hand and then tighten
with a spark plug wrench. Be careful
not to overtighten it.
Tightening torque:
14 to 22 ft-lb (20 to 29 Nzm)
5. Reconnect the spark plug cables to their
original positions.
AIR CLEANER
Viscous paper type
The filter element should not be cleaned and
reused. Replace it according to the mainte-
nance intervals shown in the ‘‘Maintenance’’
section. When replacing the filter, wipe the
inside of the air cleaner housing and the cover
with a damp cloth.
SID0101
SID0102
SID0103
SID0104
DO-IT-YOURSELF
7-17
Z 96.12.20/ X