Owner`s manual

2. Replace the battery with a new one. Insert
the battery as illustrated above.
Recommended battery: Sanyo CR2025 or
equivalent.
3. Close the lid securely.
4. Press the ‘‘
’’ button, then the ‘‘ ’’
button two or three times to check the
multi-remote controller operation.
If the batteries is removed for any
reason other than replacement, per-
form step 4 above.
O An improperly disposed battery can
hurt the environment. Always con-
firm local regulations for battery dis-
posal.
O The remote controller is water-
proof; however, if it does get wet,
immediately wipe completely dry.
O When changing batteries, do not let
dust or oil get on the controller.
FCC Notice:
Changes or modifications not expressly
approved by the manufacturer compli-
ance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the
FCC Rules and RSS-210 of Industry
Canada. Operation is subject to the
following two conditions: (1) This de-
vice may not cause harmful interfer-
ence and (2) this device must accept
any interference received, including in-
terference that may cause undesired
operation.
SIP0195
PRE-DRIVING CHECKS AND ADJUSTMENTS
2-9
Z 96.12.20/ X