Owner`s manual

shoulder belt anchor is securely
fixed in position.
2-POINT TYPE WITHOUT
RETRACTOR (Rear center lap
belt)
Fastening the belts
1. Insert the tongue into the buckle marked
CENTER until it snaps.
2. To lengthen, hold the tongue at a right
angle to the belt and pull on the belt.
To shorten, pull the free end of the belt
away from the tongue, then pull the belt
clip to take up the slack.
SIP0075
SIP0076
PRE-DRIVING CHECKS AND ADJUSTMENTS
2-35
Z 96.12.20/ X