OWNER'S MANUAL INFINITE QX 4 - QX 6 POWER AMPLIFIERS
OWNER'S MANUAL INFINITE QX 4 - QX 6 POWER AMPLIFIERS Infinite X
Infinite X IMPORTANT THE PRODUCT REQUIRES CLASS 2 OUTPUT WIRING. TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE TOP OR BOTTOM COVERS. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DISCONNECT POWER CORD BEFORE REMOVING REAR PANEL COVER TO ACCESS GAIN SWITCH.
Infinite X Features Rugged, touring grade chassis. E.I.A. Standard 2U 19" (48.3cm) rack-mountable. Ultra high frequency switch modulated power supply (SMP). 'VSP' Velocity Sense Protection circuitry protects speakers from over excursion. 'CEP' Clip Elimination Protection prevents clipped waveforms from reaching the outputs. Four independent filter networks with adjustable crossover frequencies. Stereo, parallel and bridge operation for optimal load matching. Soft start for loudspeaker protection.
Infinite X 34 5 2 1 2 1 ON -18 Power oo 0 oo 0 -6 34 5 2 3 0 L 4 1 P ON -18 oo 2 0 oo 0 -6 0 L P 2 Infinite QX 4 1 6 6 Front Panel 1.Power Switch Used to turn the amplifier on or off. 2.Level Controls Used to control CH 1, 2, 3 & 4's output levels. 3.Power LED's The Power LED's indicate that each channel is active. 4.Signal LED's When illuminated the LEDs indicate an audio signal is present at the channel's output. 5.
Infinite X 3 4 6 CH 4 - CH 3 Stereo Bridge Lo Pass 7 Hi Pass 300Hz 1k 2k 300Hz 6 1k 2k 3.5k Bypass Parallel Bridge Mode Out 1 : Pin 1+ : sig + Out 3 : Pin 1+ : sig + Pin 2+ : sig Pin 2+ : sig - 100 Hz 5kHz Lo Pass Hi Pass CH 2 - CH 1 Stereo Bridge Lo Pass 7 Hi Pass 1k 300Hz 2k 3.5k 100 Hz 70Hz CH 4 XOVER 2 4 6 70Hz 5kHz 300Hz 6 1k 2k 3.5k Bypass Parallel 100 Hz Bypass CH 3 XOVER Outputs 5kHz Hi Pass Serial No.
Infinite X TECHNICAL SPECIFICATIONS For Infinite models QX 4 - QX 6 20Hz - 20kHz +0.05 dB / -0.06 dB FREQUENCY RESPONSE ref.100W@8W THD ref. 4W, 1KHz 0.02% S/N 20Hz-20kHz, ref full output 104 dB 20kW balanced INPUT IMPEDANCE CROSSTALK >90dB CMRR ref.
Infinite X Notes Bridge Mode To bridge channel 1 and 2 connect to input 1 only and use CH1 speakon output (pins 1+, 2+). To bridge channel 3 and 4 connect to input 3 only and use CH3 speakon output (pins 1+, 2+). Pin 1+ will be signal positive (+) on output 1 and 3 in bridge mode. Use channel 1's filter when bridging channels 1 and 2 and channel 3's filter when bridging channels 3 and 4.
Infinite X Service This unit has very sophisticated circuitry and should only be serviced by a fully trained technician. No user serviceable parts inside Refer servicing to a qualified technician Worldwide Service Service may be obtained from your local authorised service centre. To obtain service, simply present your sales receipt as proof of purchase along with the defective unit to an authorised service centre. They will handle the necessary paperwork and repair.
Infinite X LIMITED WARRANTY THE WARRANTY For a period of three (3) years from the date of delivery to the original purchaser (as shown on the original invoice or sales receipt), Void Acoustics (hereinafter "Void") warrants to the ORIGINAL OWNER of each new Infinite Series product (provided it was purchased at an Authorised Void Dealer) that it is free of defects in materials and workmanship and that each product will meet or exceed all factory published specifications for each respective model.
Unit 10B, Dawkins Road Ind Est, Poole, Dorset, BH15 4JD Tel: +44 (0)844 410 1440 Fax: +44 (0)844 410 1439 Void Acoustics This warranty in no way affects your statutory rights. Carriage costs to Void Acoustics will be returned to the customer if warranty work proves necessary. Packing, insurance and freight on the return journey will be paid by Void Acoustics or its authorised dealers. Do not send goods to Void Acoustics without first obtaining a return authorisation number. 4.
Void Acoustics Unit 10B Dawkins Road Ind Est Poole Dorset BH15 4JD UK Post code : Post code : Tel : Your name and address Tel : Suppliers name and address Serial number Date of purchase Model Thank you for purchasing this Void product. Please complete this warranty registration card and cut off this part and send it to the address overleaf.
