User`s manual

QX Hawk Industrial Imager User’s Manual iii
Introduction
Table of Contents
Chapter 1 Quick Start
Step 1 Check Hardware ..........................................................................1-2
Step 2 Connect the System..................................................................... 1-3
Step 3 Position the Imager ...................................................................... 1-4
Step 4 Install ESP.................................................................................... 1-5
Step 5 Select Model ................................................................................ 1-6
Step 6 Connect........................................................................................1-7
Step 7 Locate Symbol .............................................................................1-9
Step 8 Calibrate.....................................................................................1-11
Step 9 Test Read Rate ..........................................................................1-12
Step 10 Configure the Imager ...............................................................1-13
Step 11 Save Changes..........................................................................1-14
Chapter 2 Using ESP
EZ Mode .................................................................................................. 2-2
App Mode ................................................................................................ 2-3
Menu Toolbar .......................................................................................... 2-4
Navigating in ESP................................................................................. 2-15
Send/Receive Options.......................................................................... 2-16
Chapter 3 Hardware Integration
Connectors .............................................................................................. 3-2
Cordsets .................................................................................................. 3-3
QX Hawk and QX-1 Connectors and Pinouts.......................................... 3-4
Power and Trigger Switching...................................................................3-8
Port Routing.............................................................................................3-9
Application Examples ............................................................................ 3-10
Chapter 4 Setup
Video .......................................................................................................4-2
Evaluation............................................................................................. 4-14
Calibration .............................................................................................4-17
Window of Interest................................................................................. 4-18
Configuration Database.........................................................................4-20
Ordered Output...................................................................................... 4-27
Output Format .......................................................................................4-31
Dynamic Setup ......................................................................................4-35
Chapter 5 Parameters
Communication........................................................................................ 5-2
Read Cycle ............................................................................................ 5-40
Symbologies .......................................................................................... 5-60
I/O Parameters ...................................................................................... 5-97
Symbol Quality ....................................................................................5-159
Matchcode ........................................................................................... 5-166