Manualshelf

User`s manual

ManualsBrandsVoid ManualsAmplifierINFINITE QX 6
301302303304305306307308309310
7-32 QX Hawk Industrial Imager User’s Manual
Temperature
Temperature
Sending a <@TEMP> command from ESP’s Terminal will cause the imager to output the
current temperature of the image sensor in degrees celsius. The output from this command
is only updated after an image frame has been captured. If the command is requested but
an image has not been captured, the previous temperature output value will remain the same.
Output Example:
Command Response
<@TEMP> <TEMP/30.50c>