User`s manual

A-2 QX Hawk Industrial Imager User’s Manual
General Specifications
Appendix A — General Specifications
Mechanical
Height: 1.59" (40.5 mm)
Width: 2.27" (57.6 mm)
Depth: 3.79" (96.3 mm)
Weight: 10 oz. (280 g)
Environmental
Enclosure: Die-cast aluminum, IP65/67 rated
Operating Temperature: 0° to 50° C (32° to
122° F)
Storage Temperature: –40° to 70° C (–40° to
158° F)
Humidity: up to 90% (non-condensing)
Communication Interface
Standard Interfaces: RS-232, RS-422, RS-485,
Ethernet
CE Mark
General Immunity for Light Industry: EN
55024:1998 ITE Immunity Standard
Radiated and Conducted Emissions of ITE
Equipment: EN 55022:98 ITE Disturbances
Light Source
Type: High-output LEDs
Light Collection Options
Progressive scan, square pixel.
Shutter: Software-adjustable 1/60 to 1/40,000
WVGA: 752 x 480 pixels
Symbologies
2D Symbologies: Data Matrix (ECC 0-200), QR
Code, Micro QR Code
Stacked Symbologies: PDF417,
MicroPDF417, GS1 DataBar (Composite and
Stacked)
Linear Symbologies: Code 39, Code 128,
BC412, Interleaved 2 of 5, UCP/EAN, Codabar,
Code 93
Read Parameters
Pitch: ±30°
Skew: ±30°
Tilt: ±360°
Decode Rate: Up to 60 decodes per second
Focal Range: 1” (33 mm) to ∞ (liquid lens autofocus) Note: Ranges correspond to specific symbol element
sizes, and range increases as element size increases.
Indicators
LEDs: Read Performance, Power, Read Status
Green Flash: Good Read
Red X: Symbol Locator
Beeper: Good Read, Match/Mismatch, No Read, Serial Command Confirmation, On/Off
QX Hawk Dimensions
Note: Nominal dimensions shown. Typical tolerances apply.