User`s manual

QX Hawk Industrial Imager User’s Manual A-21
Appendices
DataBar Limited <K483,status>
DataBar Expanded <K484,status,fixed symbol length status,fixed symbol length>
MicroPDF417 <K485,status,unused,fixed length status,fixed symbol length>
Camera Setup
Window of Interest <K516,row pointer,column pointer,row depth,column width>
Focus Distance <K525,focal distance,distance units,lens type>
Illumination <K539,mode,brightness>
Camera Settings <K541,shutter speed,gain>
Sub-Sampling <K542,sub-sampling>
Morphological Pre-Processing <K550,status>
Morphological Operations <K551,unused,operation,size>
I/O Parameters
Calibration Options
<K529,gain,shutter speed,focus position,symbol type,window of
interest framing,window of interest margin>
Serial Verification
< K701, serial command echo status, serial command beep status,
control/hex
output>
Beeper <K702,status>
Quality Output <K704,quality output separator, decodes per trigger status>
Symbol Data Output <K705,symbol data output status, when to output symbol data>
Read Duration Output <K706,status,separator>
Global Symbol Quality Output <K708,quality output separator,output mode>
ISO/IEC 16022 Parameters
<K709,symbol contrast,print growth,axial non-uniformity,unused
ECC>
Data Matrix Grading
<K710,percent cell damage,total read time,capture time,locate
time,decode time,pixels per element,ECC level,matrix size,quiet
zone,symbol angle>
No Read Message <K714,status,message>
Input 1 <K730,input mode,active state>
Frame Information
< K734, output frame number,output coordinates>
ISO/IEC 16022 Grade LED Display < K737, unused,LED AIM LED display>
Green Flash LED < K750, LED status,targeting status,green flash duration>
Status Indicators <K751,comm,bar graph,I/O 1,I/O 2>
EZ Trax Output
<K757,status,port,image mode,image format,image quality,
object info enable,grade enable>
Database Identifier Output <K759,status,separator character>
EZ Button
< K770, global status,default on power-on,load configuration database,
save for power-on>
EZ Button Modes <K771,first beep,second beep,third beep,fourth beep>>
Trend Analysis Output 1
<K780,trend analysis mode,number of triggers,number to output
on,decodes per trigger>
Trend Analysis Output 2
<K781,trend analysis mode,number of triggers,number to output
on,decodes per trigger>
Trend Analysis Output 3
<K782,trend analysis mode,number of triggers,number to output
on,decodes per trigger>