User`s manual

A-32 QX Hawk Industrial Imager User’s Manual
Serial Commands
Diagnostic Output, Ethernet TCP Port 2
External Source Processing Mode, Ethernet TCP Port 2
Preamble
Preamble Status
Preamble Characters
Postamble
Postamble Status
Postamble Characters
Response Timeout
Serial Cmd: <K134,symbol data output,extra symbol information,diagnostic output,
external source processing mode>
Default: 1 = Enabled
Options: 0 = Disabled 1 = Enabled
Serial Cmd: <K134,symbol data output,extra symbol information,diagnostic output,
external source processing mode>
Default: 1 = Command
Options: 0 = Disabled 1 = Command 2 = Data
Serial Cmd: <K141,status,preamble character(s)>
Default: 0 = Disabled
Options: 0 = Disabled 1 = Enabled
Serial Cmd: <K141,status,preamble character(s)>
Default: CR (0x0D)
Options: 1 – 4 ASCII characters
Serial Cmd: <K142,status,postamble character(s)>
Default: 1 = Enabled
Options: 0 = Disabled 1 = Enabled
Serial Cmd: <K142,status,postamble character(s)>
Default: CR LF (0x0D 0x0A)
Options: 1 – 4 ASCII characters
Serial Cmd: <K143,response timeout>
Default: 5 (x10 ms = 50)
Options: 0 to 255 (x10 ms)