User`s manual

QX Hawk Industrial Imager User’s Manual A-39
Appendices
External Trigger State
End of Read Cycle
End of Read Cycle Mode
Read Cycle Timeout
Decodes Before Output
Decodes Before Output
Mode
Multisymbol
Number of Symbols
Serial Cmd: <K202,active state>
Default: 1 = Positive
Options: 0 = Negative 1 = Positive
Serial Cmd: <K220,end of read cycle,read cycle timeout>
Default: 0 = Timeout
Options: 0 = Timeout
1 = New Trigger
2 = Timeout or New Trigger
3 = Last Frame
4 = Last Frame or New Trigger
Serial Cmd: <K220,end of read cycle,read cycle timeout>
Default: 100 (x10 ms = 1 second)
Options: 1 to 65535
Serial Cmd: <K221,decodes before output,mode>
Default: 1
Options: 1 to 255
Serial Cmd: <K221,decodes before output,mode>
Default: 0 = Non-Consecutive
Options: 0 = Non-Consecutive 1 = Consecutive
Serial Cmd: <K222,number of symbols,multisymbol separator>
Default: 1
Options: 1 to 100