User`s manual

QX Hawk Industrial Imager User’s Manual A-57
Appendices
Status Indicators
Bar Graph
I/O 1
I/O 2
Database Identifier Output
Separator
Serial Cmd: <K751,status,bar graph,I/O 1,I/O 2>
Default: 1 = PHY Activity
Options: 0 = Disabled
1 = PHY Activity
2 = Protocol Activity
Serial Cmd: <K751,status,bar graph,I/O 1,I/O 2>
Default: 1 = Read Rate / Good Read
Options: 0 = Disabled
1 = Read Rate / Good Read
Serial Cmd: <K751,status,bar graph,I/O 1,I/O 2>
Default: 1 = Output Active
Options: 0 = Disabled
1 = Output Active
2 = Input Active
Serial Cmd: <K751,status,bar graph,I/O 1,I/O 2>
Default: 2 = Input Active
Options: 0 = Disabled
1 = Output Active
2 = Input Active
Serial Cmd: <K759,status,separator>
Default: 0 = Disabed
Options: 0 = Disabled 1 = Enabled
Serial Cmd: <K759,status,separator>
Default: Space (0x20)
Options: Any 7-bit ASCII character