User`s manual

A-62 QX Hawk Industrial Imager User’s Manual
Serial Commands
Wild Card Character
Sequence on No Read
Sequence on Mismatch
Master Symbol Database Size
New Master Pin
Master Symbol
Index
Master Symbol Data
Match Replace
Serial Cmd: <K223,matchcode type,sequential matching,match start position,match
length, wild card character ,sequence on No Read,sequence on mismatch>
Default: * (asterisk)
Options: Any 7-bit ASCII character
Serial Cmd: <K223,matchcode type,sequential matching,match start position,match
length,wild card character, sequence on No Read ,sequence on mismatch>
Default: 1 = Enabled
Options: 0 = Disabled 1 = Enabled
Serial Cmd: <K223,matchcode type,sequential matching,match start position,match
length,wild card character,sequence on No Read, sequence on mismatch >
Default: 0 = Disabled
Options: 0 = Disabled 1 = Enabled
Serial Cmd: <K224,
number of master symbols >
Default: 1
Options: 1 to 10
Serial Cmd: <K225,status>
Default: 0 = Disabled
Options: 0 = Disabled 1 = Enabled
Serial Cmd: <K231,index,master symbol data>
Options: 1 to 32768
Serial Cmd: <K231,index,master symbol data>
Options: Any valid ASCII string
Serial Cmd: <K735,status,replacement string>
Default: 0 = Disabled
Options: 0 = Disabled 1 = Enabled