User`s manual

A-64 QX Hawk Industrial Imager User’s Manual
Serial Commands
Diagnostics
Hours Since Reset (Read-only)
Hours
Minutes
Service Message
Service Message
Threshold
Resolution
User-Defined Name
Hours Since Reset (Read-only) <K407> (returns: hours,minutes)
Service Message <K409,status,service message, threshold,resolution>
User-Defined Name <K412,user-defined name>
Serial Cmd: <K407,hours,minutes>
16-bit counter (0 to 65535)
Serial Cmd: <K407,hours,minutes>
16-bit counter (0 to 60)
Serial Cmd: <K409,status,service message,threshold,resolution>
Default: 0 = Disabled
Options: 0 = Disabled 1 = Enabled
Serial Cmd: <K409,status,service message,threshold,resolution>
Default: SERVICE
Options: Any valid ASCII string up to 128 characters
Serial Cmd: <K409,status,service message,threshold,resolution>
Default: 300 (5 minutes)
Options: 1 to 65535
Serial Cmd: <K409,status,service message,threshold,resolution>
Default: 0 = Seconds
Options: 0 = Seconds 1 = Minutes
Serial Cmd: <K412,user-defined name>
Default: QX Hawk
Options: Any valid ASCII string up to 50 characters