User`s manual

QX Hawk Industrial Imager User’s Manual A-65
Appendices
Output Format
Format Extract
Output Index
Start Location
Length
Format Insert
Output Index
Output Index refers to the database entry to be modified with this command. A formatted
output is built by extracting data from a symbol’s original data output and/or inserting
user-defined characters.
It may be helpful to think of individual indexes as positions in the final formatted output.
Starting with index # 1, enter either an extract or insert command to begin building the
required output string. Then, with the next index number, enter either an extract or insert
command to continue building the output string. Continue this process until the string is
complete.
Format Extract <K740,output index,start location,length>
Format Insert <K741,output index,length,hex string>
Format Assign <K742,symbol number,status>
Output Format Status <K743,output format status>
Output Filter Configuration
<K744,filter number,symbology,length,wildcard,placeholder,
data,unused,database index>
Output Filter Enable <K745,number of filters>
Serial Cmd: <K740,output index,start location,length>
Options: 1 to 100
Serial Cmd: <K740,output index,start location,length>
Default: 0
Options: 1 to n (maximum number of characters in the symbol data).
Serial Cmd: <K740,output index,start location,length>
Default: 0 (Disabled; end of format cell array)
Options: 1 to n (maximum number of characters in the symbol data).
Serial Cmd: <K741,output index,length,hex string>
Options: 1 to 100