User`s manual

3-4 QX Hawk Industrial Imager User’s Manual
QX Hawk and QX-1 Connectors and Pinouts
QX Hawk and QX-1 Connectors and Pinouts
When deploying a network of imagers and interface devices in an industrial setting, it is
important to use components whose pin assignments are arranged in a way that avoids
communication errors and equipment damage. This can be achieved with components
that are designed in a logical, consistent, and easy-to-implement way.
The QX Hawk has a very simple pin assignment methodology. The clearly identified connectors
at the back of the unit can be used to receive and bus power, and also to send and receive
data and commands.
See Appendix C – Ground and Shield Considerations for information about grounding
the imager correctly.
Ground
Output 3
Output 1
Output 2
New Master
Default
Power
Input Common
Output Common
RS-232 RxD
Trigger
RS-232
TxD
QX Hawk (Back View)
Input
Common
RS-422/485 RxD (–)
RS-232 TxD/
RS-232 RTS
Trigger
RS-232 RxD/
RS-232 CTS
Power
Ground
RS-422/485
RxD (+)
RS-422/485
TxD (+)
RS-422/485 TxD (–)
Input 1
Termi na ted
A (Serial) M12 12-pin Plug
B (Serial) M12 12-pin Socket
A is a serial M12 12-pin plug.
B is a serial M12 12-pin socket or an Ethernet M12
8-pin socket.
TX (+)
RX (–)
RX (+)
TX (–)
Termi nat ed
Termi nat ed
B (Ethernet) M12 8-pin Socket
Terminated
Terminated