User`s manual

4-4 QX Hawk Industrial Imager User’s Manual
Video
Select Lens
This value must reflect the correct camera lens currently installed on the product. This value
is configured after leaving the factory. However, since the lens can be changed by the user,
this parameter needs to be updated to reflect the currently installed lens.
Click the Select Lens button on the Video tab.
To verify lens type, turn off power to the QX Hawk (do not look into the targeting laser).
Then look at the outer rim of the unit’s camera lens. The following markings define the
correct “Lens Type” parameter value:
‘.’, and “15” = Lens Type 1
‘..’, and “30” = Lens Type 2
‘...’, and “45” = Lens Type 3
When a lens is changed on the QX Hawk, the user can optimize the accuracy of the Focal
Distance parameter by using the <@OPTIC> command.
This parameter is “sticky”. Once saved with a <Z> or <Zc> command, it can only be
“defaulted” with <Zrdall> or <K525d>.
30 Degree Lens
45 Degree Lens
15 Degree Lens