User guide




Ram Air Scoop
07-12 GM Truck/SUV 4.8/5.3L/6.0/6.2L
PN 35353
7/29//2014
INS35353
Volant Performance · 140 Blaze Industrial Pkw
y
· Berea
,
OH 44017 · P:
(
909
)
481.3888 · F:
(
440
)
891‐1868
3
E-Mail: [e-mail] www.volant.com
InstallationInstructions:

1. Turnthevehicletothemaxleftandallowtheenginetocoolbeforebeginningtheinstall.(FigA)

2. Removethe210mmboltsholdingthewheelliner tothesupporttray.(FigB)

3. Removetheboltsholdingthewheelwelllinertothefender.(Fig
C)

4. Removethepushpinsfromthefrontofthewheelliner.(FigD)

5. TiethelinerbacksoyouhaveaccesstothesupporttrayandthebottomoftheVolantairbox.(FigE)

6. Removethesupporttrayfromthecoresupport.(FigF1
andF2)

7. Attachtheprovided33/4x6insleevetotheVolantboxwitha#60clampusinga5/16socketornutdriveronly.
(FigG)

8. Presstheramairscoopintothesleeveuntilitmakescontactwith thelovervalanceusingajack
willhelp
supportthescoopwhilethebracketsareinstalled.Loosenthefenderlinersoitcanbepulledforwardforthe
nextstep.(FigH1andH2)

9. Thereare2sharpangledbracketsincludedinthehardwarebag,holdthebracketsuptotheramairscoopand

usethebracketthatbestalignswiththefenderliner.(FigI1andI2)

10. Hadtightenthebrackettothescoopusingtheprovided1/4x20bolts,1/4lockwashersand1/4washers.(Fig
J)

11. Handtightenthe6mmx25bolt,7/8washers,1/4lock
washerand6mmnuttoholdthebrackettothefender
liner.(FigK1andK2)

12. Removetheboltonthefendersideofthebodymountbracket.(FigL)

13. Thereare3straightbracketsincludedinthehardwarebag,holdthebracketsuptotheramair
scoopanduse
thebracketthatbestalignswiththeframemount.(FigM)

14. Handtightenthefactoryboltintotheframe.(FigN)

15. Handtightenthe1/420bolt,1/4lockwasherand1/4washertotheramairscoop.(FigO)

16. Adjustthescoop
asnecessaryandtightenthescooptothesleevewitha#60clampusinga5/16socketornut
driveronly.(FigP)
17. Tightenthefactoryboltsholdingthewheelwelllinertothefender.(FigQ)