742-7 Phoenix S Instruction Manual

Propeller Assembly
8 / 12
Shaft
Adaptor
Assemble the propeller by the order as
shown.
WARNING: Do NOT power on the airplane
while assembling the propeller, or serious
damages may cause!
Nut
Nut
Spinner
Screws
Propeller Base & Blades
Washer
Center of Gravity
The ideal C.G. position is 70±5mm behind the leading edge measured at where the
wing meets the fuselage . The C.G. has a GREAT effect on the way of the model flight.
If the C.G. is too far aft ( tail heavy ), the model will be too responsive and difficult to
control. If the C.G. is too far forward (nose heavy), the model will be too stable and not
responsive enough.In order to obtain the C.G. specified, add weight to the fuselage or
move the battery position. Check the C.G. before flying.
PLEASE NOTE: This checklist is NOT intended t o replace the content included in this instruction
manual. Although it can be used as a quick start guide, we strongly suggest reading through this
manual completely before proceeding.
Ensure the throttle control stick is on the button position then plug the battery
.
Fly the model (hand
g
Always turn the transmitter off last
Flight Checklist