User Manual 3D CINEMA MUV110064-V1R2 EDGETM 1.
02.
SUMMARY I. 3D KIT PRESENTATION 1. General presentation 2. 3D kit composition II. PRODUCT DESCRIPTION 1. Glasses 2. IR emitter 3. Tester 4. Synchronizer III. 3D KIT FASTENING IV. CONNECTION & SYNCHRONIZATION 03.
I. 1. GENERAL PRESENTATION As a result of Volfoni's long experience in managing the world's largest stock of active 3D glasses, EDGE 1.2 benefits from the latest ergonomic and technical innovations. EDGE 's comfort and easy use is unmatched. TM TM The power of EDGE 1.2 Exceptional image quality without ghosting, wherever you sit. The brightest light level on the market. The 3D kit (infra-red emitter) allows easy integration in less than 30 min with existing digital theaters using a standard screen.
I. 3D KIT PRESENTATION 2. 3D KIT COMPOSITION EDGE 1.2 GLASSES + battery tool + removable arms TM IR EMITTER + fixing + wire TESTER SYNCHRONIZER + power cord + GPIO synchronizer cable 05.
II. 1. GLASSES Operating Temperature: 0°C -40°C (32F-104F) Storage Temperature: -10°C -50°C (14F-122F) The VOLFONI Active 3D Glasses use fast-response liquid crystal lenses to create the best image quality. It is the brightest and most cost-saving 3D solution currently on the market.
II. PRODUCT DESCRIPTION BATTERY REPLACEMENT To open the battery encasement on the right arm of the glasses: -Use an instrument such as the Volfoni's battery tool, a paper clip or a prong. -Put the glasses on a desk/table as it will be more convenient and easy -Find the small hole on the right arm of the glasses, where the arm connects with the battery encasement.
II. Thank you for using our STANDARD ACTIVE 3D DIGITAL CINEMA SYSTEM. Before starting, please check if the following parts are included in the package. 2. IR EMITTER Long Range IR Emitter Long Range IR Emitter VAIK-0100 is a compact and powerful unit. The emitter, with many built-in infrared LEDs, allows coverage all types of theater rooms, regardless of the number of seats. 4 emitters can be linked up. Thanks to its lightweight design, VAIK-0100 enhances the heat dissipation (LED life protection).
II. PRODUCT DESCRIPTION Basic Specification IR Wavelength: 940 nm Power Consumption: 10W in active status Laser: Max Output: 0.5mW, Wavelength: 650 nm± 10 Dimension: 361 mm x 70 mm x 44 mm WARNING : The laser pointer of this emitter emits Class IIIA laser. Please DO NOT stare into beam or view directly with optical instruments. 3.
II. 4. SYNCHRONIZER Power Module Multi-function Distribution Module The multi-function Distribution Module is a unit specially designed for mid size and large digital 3D cinemas. This unit is plugged into the digital projector and receives frame synchronizing signal via GPIO (DB-37). It extends to four DB-9 emitter outputs. It also supports the extension of the Distribution Module thanks to a DIN-3 cable, that simplifies cinema wiring. Each port is equipped with an error diagnosis indicating LED. 10.
II.
III. WALL FASTENER Before installing the emitter in the front of the screen, make sure you have all the needed tools and the instruction manual. This wall fixing part is provided with all the screws and wall anchors you might need. Follow the instructions to fasten this kit.
III. 3D KIT FASTENING INSTALLATION STEP 1 use the wall base to mark each hole to drill with a pencil. STEP 3 Insert wall anchors STEP 2 drill the holes with the given bit (for wood surface only) STEP 4 tightly screw the base to the wall (For solid concrete and drywall only) STEP 5 assemble the arm to the base and then screw the emitter on it 13.
IV. Digital Projector GPI/O(DB37-F) GPI/O Extension (DB37-M) PowerAdapter 24VDC/3A Power Adapter 24VDC/3A Distribution Module Distribution Module(Extension) DIN-3 DIN-3 Extension Cable Distribution Module Cable DB-9 IR Emitter 3 DB-9 IR Emitter 2 IR Emitter Cable DB-9 IR Emitter 1 14.
IV. CONNECTION & SYNCHRONIZATION Please refer to the following technical board for the digital projector. These parameters are for information purpose only. They may be adapted if necessary. TECHNICAL SPECIFICATIONS Fall time 500µs Rise time 1.5 ms Contrast > 200 (no ghosting) Transmission in the clear state Chromaticity Standard parameters EDGE 1.2 Double flash (4.2) 33% Color correction not mandatory TM Triple flash (6.
VOLFONI SAS 29, Rue JJ Rousseau 75001 Paris France VOLFONI GmbH Erzgießereistraße 38 80335 München Germany VOLFONI Ltd 21, Tower one Lippo center 89, Queensway Hong-Kong VOLFONI Inc 3450, Cahuenga Bd West. UNIT 504 Los Angeles, CA, 90068 USA VOLFONI Ltd. 90 Long Acre Covent Garden London WC2E 9RZ UK VOLFONI Iberia Ronda Guglielmo Marconi, 4 46980 Paterna (Valencia) Spain support@volfoni.com contact@volfoni.com www.volfoni.
